General Operations
Jumping to a Specific Time on a Disc (CD, VCD and DVD only), continued...
example
To jump directly to 1:45
1.Press TIME on the remote control
2.Press the LEFT ARROW button
2.Press 0, 0, 0, 1, 4, then 5
3.Press PLAY on the remote control
4.The disc will begin playing at 1:45 minutes in the disc
Programming a Custom Track Order
The
1.If there is a disc in the
2.Press the PROGRAM button on the remote control to access the Program menu. The Program menu will appear on the TV screen
3.Enter a track number using the number buttons on the remote control
4.Press the RIGHT ARROW on the remote control to enter that track into the playlist and to jump to the next playlist slot
5.Continue this until your playlist is complete
example (on next page)
To create a playlist in the following order:
1.Track 14
2.Track 7
3.Track 3
4.Track 1
1.Press the PROGRAM button to enter Program mode
2.Press 14 and then ENTER
3.Press 7 and then ENTER
4.Press 3 and then ENTER
5.Press 1 and then ENTER
6.Move to the PLAY selection on the menu and press PLAY on the remote to begin playing in this order
7.Press STOP twice to exit the programmed playlist
Clearing tracks in Program Mode
Select the CLEAR selecetion on the PROGRAM menu and press the PLAY button on the remote control to erase the programmed tracks.
Using Digital Key Control
Digital Key Control allows you to change the musical key of disc music to fit any singer’s vocal range. The Digital Key Control buttons are located on the remote control and front panel. Note that the music will be increasingly distorted with each step away from the natural key.
b - Lowers the musical key
(remote control only) - Resets the musical key back to the original or natural key
# - Raises the musical key
21