Descriptions and Functions, Rear Panel

Descriptions and Functions, cont.

�

Rear Panel

�

1.Fuse - This plastic cover is the housing for the PA-MAN’s fuse. When replacing the fuse, only use the same type and rating.

2.Power Input - Connect the power cord (included) here.

3.Voltage Selector Switch - This switch is used to select the voltage setting according to country. For use in the U.S. the voltage selector should be set to 115V. In Europe, set to 230V.

4.¼” Speaker Outputs - Use these speaker left and right outputs to connect speakers.

5.RCA Video Output - Connect an RCA video cable from this connection to your TV or input device’s video input.

�

UHF Modules

1. UHF Module indicator LEDs-

-POWER (LED) - Indicates whether the UHF-Module is ON or OFF. When it is lit, the power is ON. -RF (LED) - Lights when the corresponding microphone is powered on.

-AF (LED) - Lights when AF signals are received from the microphone channels.

2.Squelch - Manual controls for controlling each microphone’s signal strength for best performance. Turn clockwise to increase SQUELCH control and turn counter-clockwise to decrease SQUELCH application.

3.Level Control - Adjusts the individual VOLUME of the receiver’s 4 microphone channels.