VocoPro PA-MAN owner manual Handheld Microphone Battery Installation

Descriptions and Functions, cont.

Microphone

1.LED- This will blink on when micropone power is switched on, it will remain lit if the battery is weak and needs replacement.

2.On- Turn the microphone power on by moving the switch to the highest position.

3.Mute- Mute the audio output from the microphone by moving the switch to this position in the center.

4. Off- Turn microphone power off by moving the switch to the lowest position.

� � �

�

Handheld Microphone Battery Installation

1.To remove the lid, press down on the tab and slide the lid down toward the bottom of the mic.

2.Insert two fresh 1.5-volt AA alkaline batteries. Make sure the batteries are inserted in the right direction according to polarity (+/-).

3.Close the BATTERY COMPARTMENT lid.

17