Roland VGA-3 owner manual More Advanced Operation, Synth Filter, Poly Octave String Select

Page 16

COSM GUITAR

More Advanced Operation

SYNTH FILTER

With SYNTH LEAD or SYNTH PAD selected, you can use an optional expression pedal (EV-5; optional) to shift the synth filter.

When using an expression pedal (EV-5; optional) to shift the synth filter, set EXP PEDAL MODE in the System Setup to [1] VOLUME/GK/WAH or [2] GK/WAH.

“EXP PEDAL MODE Setting” (p. 25)

POLY OCTAVE STRING SELECT

When POLY OCTAVE is selected, you can then select the strings to which the octave sound is added.

*As set at the factory, an octave sound is added to the sound from all of the strings.

Use the following procedure to select the pattern.

1.Select POLY OCTAVE.

2.Press [PICKUP] to select the pattern.

[PICKUP] Indicator Section

fig.0050



(F) Lit	(C) Lit	(R) Lit
String 1–6	String 4–6	String 5, 6

*The indicator goes off after a few moments if no button is pressed.

Image 16

Contents Main Features Cosm AmplifierImportant Safety Instructions Page Fig. a Placement Power SupplyMaintenance Additional Precautions Contents Basic Operation Front PanelWrite Button Turning the Power On Rear PanelPreparations for using the GK Pickup Settings for the GK Pickup GK SetupBasic Setting Procedure GK Setting Settings Type of SettingsGK Direction Setting GK Phase Setting GK S1/S2 SettingGK Sens 6-1 Settings Rotate Guitar Type to selectGK Level Setting Finishing the GK SetupGK Setup Chart Press TunerList of Guitar Types ElectricAcoustic SpecialMore Advanced Operation Synth FilterPoly Octave String Select Select Poly Octave Press Pickup to select the patternStack List of Amp TypesCombo Effects Setting the Delay Time with TAP Input Changing the Doubling Delay TimeClear WarmPlate SpringStoring Knob and Button Settings to Memory Write Operate the knob for the setting you want to checkCalling Up Memory Press Memory button to select the memory to be called upUsing the GFC-50 to Operate the VGA-3 Connecting the VGA-3 and the GFC-50How to Call Up the VGA-3’s Memories Using the GFC-50 Switching Memories With the GFC-50Control Using an External Foot Switch or Pedal Storing Writing to the VGA-3’s Memories Using the GFC-50Press the VGA-3’s Write 1 once more Making the System Settings System Setup Tuner Pitch SettingTuner Level Setting Start the System SetupNS Threshold Setting Foot SW FS1/FS2 SettingEXP Pedal Mode Setting EXP Pedal Hold SettingMidi Omni Mode Setting System Setup Chart Finishing the System SetupRestoring the Factory Settings When Restoring All Settings to Their Factory SettingsHold down Write while you switch on the Power switch Additional DataPress Write two times Other Problems TroubleshootingTrouble with the Sound Block Diagram/Effect Connection Procedure Midi Implementation Chart Specifications VGA-3 V-GUITAR AmplifierMemory Sheet Factory Settings Guitar Type AMP Type EFX Delay ReverbMemo Avis