Roland VGA-3 owner manual NS Threshold Setting, Foot SW FS1/FS2 Setting, EXP Pedal Mode Setting

Making the SYSTEM Settings (SYSTEM Setup)

NS THRESHOLD Setting

This sets how much of the internal noise suppressor is

applied.

The noise suppressor is an effect that reduces guitar-

generated noise and hum.

1.Rotate [AMP TYPE] to select

“AMERICAN CLEAN” (NS THRESHOLD).

2.Press a MEMORY button [1]–[10] to set the amount of effect.

Memory button	Setting
[1]–[10]	0 (Off)–9

FOOT SW (FS1/FS2) Setting

This selects the action for the foot switch (BOSS FS-5U;

optional) connected to the FOOT SW jack.

1.Rotate [AMP TYPE] to select “TWEED” (FOOT SW (FS1/FS2) ).

2.Press MEMORY button [1], [2], [3], or [4] to select the function for the foot switch.

Memory button	Setting
[1]	EFX/DELAY
	FS1: Switchng the EFX on/off
	FS2: Switchng the Delay on/off
[2]	MEMORY ▼/▲
	FS1: Memory number down
	FS2: Memory number up
[3]	TAP/DELAY
	FS1: Tap input
	FS2: Switchng the Delay on/off
[4]	MANUAL/TUNER
	FS1:
	Switching the Manual/Memory mode
	FS2:
	Switchng the Tuner on/off

*When a single foot switch is connected with one cable to the FOOT SW jack, the switch is used for FS1 function.

EXP PEDAL MODE Setting

This selects the pedal function when an expression pedal is

connected.

1.Rotate [AMP TYPE] to select “BRITISH” (EXP PEDAL MODE).

2.Press MEMORY button [1], [2], or [3] to select the function for the expression pedal.

Memory button	Setting
[1]	VOLUME/GK/WAH
	• When GUITAR TYPE is set to
	SYNTH LEAD or SYNTH PAD,
	the pedal controls the filter.
	• When WAH is selected for EFX,
	it functions as a wah pedal.
	• With all other settings, it functions
	as a volume pedal.

[2]	GK/WAH
	• When GUITAR TYPE is set to
	SYNTH LEAD or SYNTH PAD,
	the pedal controls the filter.
	• When WAH is selected for EFX,
	it functions as a wah pedal.

[3]	VOLUME
	The pedal functions as a volume
	pedal at all times.

EXP PEDAL HOLD Setting

This selects the action for the expression pedal when

switching memories.

1.Rotate [AMP TYPE] to select “MATCH” (EXP PEDAL HOLD).

2.Press MEMORY button [1] or [2] to select the function for the expression pedal.

Memory button	Setting
[1]	ON
	When memories are switched, the
	volume (setting) will be as specified
	by the position of the pedal.

[2]	OFF
	When memories are switched, the
	level settings stored in the memories
	are used, regardless of the pedal
	position.
	The pedal functions as an expres-
	sion pedal as soon as it is adjusted.

25