Roland VGA-3 owner manual Midi Omni Mode Setting, System Setup Chart Finishing the System Setup

Page 26

Making the SYSTEM Settings (SYSTEM Setup)

MIDI OMNI MODE Setting

You can set the MIDI Receive channel to Omni ON, whereby MIDI is received over any channel; or Omni OFF, whereby channel 1 is used only.

1.Rotate [AMP TYPE] to select “CLASSIC I” (MIDI OMNI MODE).

2.Press MEMORY button [1] or [2] to set the MIDI OMNI MODE.

Memory button	Setting
[1]	ON
	Data can be received on any channel
	(Omni On).

[2]	OFF
	Only MIDI channel 1 is used (Omni
	Off).
	This will function only with the chan-
	nel on the transmitting MIDI device
	set to 1.

SYSTEM Setup Chart

fig.0221

Finishing the SYSTEM Setup

1.Press [TUNER].

*The settings are stored in the VGA-3 at the time the settings values are changed. No separate action is needed to save the settings.

Image 26

Contents Main Features Cosm AmplifierImportant Safety Instructions Page Fig. a Maintenance Power SupplyPlacement Additional Precautions Contents Basic Operation Front PanelWrite Button Turning the Power On Rear PanelBasic Setting Procedure Settings for the GK Pickup GK SetupPreparations for using the GK Pickup GK Direction Setting Type of SettingsGK Setting Settings GK Sens 6-1 Settings GK Phase SettingGK S1/S2 Setting Rotate Guitar Type to selectGK Setup Chart GK Level SettingFinishing the GK Setup Press TunerAcoustic List of Guitar TypesElectric SpecialPoly Octave String Select More Advanced OperationSynth Filter Select Poly Octave Press Pickup to select the patternCombo List of Amp TypesStack Effects Clear Setting the Delay Time with TAP InputChanging the Doubling Delay Time WarmPlate SpringCalling Up Memory Storing Knob and Button Settings to Memory WriteOperate the knob for the setting you want to check Press Memory button to select the memory to be called upHow to Call Up the VGA-3’s Memories Using the GFC-50 Using the GFC-50 to Operate the VGA-3Connecting the VGA-3 and the GFC-50 Switching Memories With the GFC-50Press the VGA-3’s Write 1 once more Storing Writing to the VGA-3’s Memories Using the GFC-50Control Using an External Foot Switch or Pedal Tuner Level Setting Making the System Settings System SetupTuner Pitch Setting Start the System SetupEXP Pedal Mode Setting NS Threshold SettingFoot SW FS1/FS2 Setting EXP Pedal Hold SettingMidi Omni Mode Setting System Setup Chart Finishing the System SetupHold down Write while you switch on the Power switch Restoring the Factory SettingsWhen Restoring All Settings to Their Factory Settings Additional DataPress Write two times Trouble with the Sound TroubleshootingOther Problems Block Diagram/Effect Connection Procedure Midi Implementation Chart Specifications VGA-3 V-GUITAR AmplifierMemory Sheet Factory Settings Guitar Type AMP Type EFX Delay ReverbMemo Avis