Roland VGA-3 owner manual Additional Data, Restoring the Factory Settings, Press Memory button

Additional Data

Restoring the Factory Settings

The data created up to the point when the factory settings are restored is lost.

When Restoring All Settings to Their Factory Settings

You can reinitialize the content of the VGA-3’s forty memories, GK Setup settings, and the SYSTEM Setup settings to their original factory settings.

3.If you want to continue and reinitialize the data, press [WRITE] two times.

The [WRITE] indicator flashes, and when the settings are completed, the VGA-3 returns to MEMORY Number 1.

1.Hold down [WRITE] while you switch ON the POWER switch.

MEMORY [1] flashes, while MEMORY [2] and [3]

remain lit.

fig.0230

Flash LitLit

* If you want to cancel the reset, turn the power off.

2.If you want to continue and reinitialize the data, press [WRITE] two times.

The [WRITE] indicator flashes, and when the settings are completed, the VGA-3 returns to MEMORY Number 1.

When Restoring Only the Memories to Their Factory Settings

1.Hold down [WRITE] while you switch ON the POWER switch.

MEMORY [1] flashes, while MEMORY [2] and [3] remain lit.

2.Press MEMORY button [2].

MEMORY [2] flashes, while MEMORY [1] and [3]

remain lit.

fig.0240

When Restoring GK Setup settings and SYSTEM Setup Settings to Their Factory Settings

1.Hold down [WRITE] while you switch ON the POWER switch.

MEMORY [1] flashes, while MEMORY [2] and [3]

remain lit.

fig.0230

2.Press MEMORY button [3].

MEMORY [3] flashes, while MEMORY [1] and [2]

remain lit.

fig.0250

LitLit Flash

* If you want to cancel the reset, turn the power off.

3.If you want to continue and reinitialize the data, press [WRITE] two times.

The [WRITE] indicator flashes, and when the settings are completed, the VGA-3 returns to MEMORY Number 1.

Lit Flash Lit

* If you want to cancel the reset, turn the power off.

27