Roland Studio Package Pro owner manual Windows

Page 11

Setting Up Studio Package Pro

■Windows 2000

1.After installing the RPC-1 into a PCI slot, start up your computer.

2.The RPC-1 will automatically be detected, and the “Found New Hardware Wizard” will start up. Click “Next.”

3.Insert the included “Drivers/Update CD-ROM” into your CD-ROM drive.

4.Choose “Search for a suitable driver for my device (Recommended)” and click “Next.”

5.In “Optional search locations,” choose “CD-ROM drives” and click “Next.”

6.A message will appear, indicating that the RPC-1 driver was found. Click “Next.”

Image 11

Contents Page Contents Index Important Notes Studio Package Pro Main Features of Studio Package ProIntroduction Installing the RPC-1 Setting Up Studio Package ProConnect your audio devices and/or headphones Connecting Your EquipmentComputer SI-24 Audio equipment Driver InstallationWindows Connect Midi and other devices as necessaryWindows Me Setting Up Studio Package Pro Windows Windows XP Home/Professional Setting Up Studio Package Pro Windows XP Making RPC-1 SettingsOpen the RPC-1 control panel Windows98/Me/2000 Click Done to close the RPC-1 control panel To Install Sonar Installing SonarThere are many different way to start SONAR. Here are a few Sonar SettingSetting Up the Midi In and Midi Out Devices Starting SonarClick the General tab, and change the following params Setting Up the RPC-1Click OK to finish setting up the RPC-1 Input Drivers Output DriversOpening the Control Surface Toolbar Setting Up the SI-24Listening to the Demo Song Quick StartMaster Fader Let’s Try Operating SonarTransport FadersPAN Knobs Status ButtonsCH Select Buttons Locate Button EQ/SEND ButtonPLUG-IN Button Edit Redo Short CUT ButtonView Button File Save Edit Undo Edit Copy Edit Paste Edit DeleteRecord Your Guitar Performance on Track 1 of the Sonar Record and Play Back a Guitar PerformancePrepare a New Project in the Sonar Connect your guitar to the SI-24’s Guitar Hi-Z jackOperate the FXPad Using FXPadApply EQ equalizer to a Track Inserting FXPadPlay Your Keyboard to Hear the Sound Setting Up a Midi TrackConnect and Play a Midi Sound Module/MIDI Keyboard Playing Back the Performance Data Recording Your Performance Midi Real-Time RecordingAdvanced Uses Using the SI-24’s DigitalMake Settings on the SI-24 and in Sonar Change the RPC-1 SettingsPlay Back the Fader/Pan Movements Automix in SonarRecording Audio from Digital in to the Sonar Record Fader/Pan MovementsSelect a source bus or buses Make Settings for Exporting the AudioWriting a Mix to an Audio File Specify the Region that will be Written as an Audio FileSet a Sonar Bus as the External Effect Send Send the Signal from Each Track to the External EffectApplying an External Effect Connect the External Effects Processor to the SI-24Click OK to finish inserting a DXi Using Software SynthesizersInserting a DXi To Set Your Options in the Roland SI-24 Property Using the Roland SI-24 PropertyTo Open the Roland SI-24 Property Digital IndexInformation