Roland Studio Package Pro owner manual Applying an External Effect

Page 32

Advanced Uses

Applying an External Effect

Here’s how you can use an external effect with SONAR. You will use a SONAR Virtual Main bus as the external effect send, and send audio signals from the tracks for processing by the external effect.

■Connect the External Effects Processor to the SI-24

1.Connect the SI-24’s AUX 1 (OUTPUT 3 / 4) to the input of your external effects processor.

2.Connect the output(s) of your external effects processor to the input(s) of the SI-24, and use the gain knob(s) to adjust the input gain.

■Set a SONAR Bus as the External Effect Send

3.In the Track view, click the Out dropdown menu of the Aux 1. You may need to enlarge the Aux 1 to show the Out control: In Aux 1, click the “Restore Strip Size” button to expand the bus.

4.Select the output to “B.”

■Send the Signal from Each Track to the External Effect

5.In a track view that you want to patch through Aux 1, click the “Aux 1 Send Enable” button (lit green). You may need to enlarge a track to show the “Aux 1 Send Enable” button: In a track, click the “Restore Strip Size” button to expand the bus.

6.Use the SI-24’s [CH SELECT] to select the track to which you want to apply the effect (lit red).

7.Turn the SI-24’s [SEND/EQ] on (lit red), and use the SEND knob to adjust the amount of signal that is sent to the external effect.

If you have not made RPC-1 mixer settings so that you can monitor the SI-24’s inputs “Step 4: Making RPC-1 Settings” (p. 14), you will not be able to monitor the effect- on at this point.

Use the output level of your external effects processor to adjust the effect return level. Although it is possible to adjust the return level using the RPC-1 mixer, the level adjustment in this case will not affect what is recorded on the tracks, so you will need to re-adjust the level of the effect sound after recording it on the tracks.

The output of an external effect can be recorded on a track in the same way as when recording a conventional track.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Page Contents Index Important Notes Studio Package Pro Main Features of Studio Package ProIntroduction Setting Up Studio Package Pro Installing the RPC-1Connecting Your Equipment Connect your audio devices and/or headphonesDriver Installation WindowsConnect Midi and other devices as necessary Computer SI-24 Audio equipmentWindows Me Setting Up Studio Package Pro Windows Windows XP Home/Professional Setting Up Studio Package Pro Windows XP Making RPC-1 SettingsOpen the RPC-1 control panel Windows98/Me/2000 Click Done to close the RPC-1 control panel Installing Sonar To Install SonarSonar Setting Setting Up the Midi In and Midi Out DevicesStarting Sonar There are many different way to start SONAR. Here are a fewSetting Up the RPC-1 Click OK to finish setting up the RPC-1Input Drivers Output Drivers Click the General tab, and change the following paramsSetting Up the SI-24 Opening the Control Surface ToolbarQuick Start Listening to the Demo SongLet’s Try Operating Sonar TransportFaders Master FaderPAN Knobs Status ButtonsCH Select Buttons Locate Button EQ/SEND ButtonPLUG-IN Button Short CUT Button View ButtonFile Save Edit Undo Edit Copy Edit Paste Edit Delete Edit RedoRecord and Play Back a Guitar Performance Prepare a New Project in the SonarConnect your guitar to the SI-24’s Guitar Hi-Z jack Record Your Guitar Performance on Track 1 of the SonarUsing FXPad Apply EQ equalizer to a TrackInserting FXPad Operate the FXPadPlay Your Keyboard to Hear the Sound Setting Up a Midi TrackConnect and Play a Midi Sound Module/MIDI Keyboard Recording Your Performance Midi Real-Time Recording Playing Back the Performance Data Using the SI-24’s Digital Make Settings on the SI-24 and in Sonar Change the RPC-1 Settings Advanced UsesAutomix in Sonar Recording Audio from Digital in to the SonarRecord Fader/Pan Movements Play Back the Fader/Pan MovementsMake Settings for Exporting the Audio Writing a Mix to an Audio FileSpecify the Region that will be Written as an Audio File Select a source bus or busesSend the Signal from Each Track to the External Effect Applying an External EffectConnect the External Effects Processor to the SI-24 Set a Sonar Bus as the External Effect SendClick OK to finish inserting a DXi Using Software SynthesizersInserting a DXi To Set Your Options in the Roland SI-24 Property Using the Roland SI-24 PropertyTo Open the Roland SI-24 Property Index DigitalInformation
Top Page Image Contents