Roland Studio Package Pro Connecting Your Equipment, Connect your audio devices and/or headphones

Page 7

Setting Up Studio Package Pro

Step 2: Connecting Your Equipment

Turn off the power of your computer and the SI-24, and use the following procedure to connect each device.

RPC-1

electric Guitar

stereo Headphones

Please select the number of MIDI ch as expect “1” (use 2–16) when you use MIDI device such

as a MIDI keyboard or a MIDI sound module by hooking up to MID IN/OUT connector on SI-24.

MIDI ch 1 is exclusively used for the communication between SI-24 and SONAR software.

MIDI Keyboard etc.

MIDI Sound Module etc.

line In jacks of audio devices

mic

digital recorder etc.

SI-24

1.Using the R-BUS cable included with the RPC-1, connect the SI-24 to the RPC-1.

	RPC-1
SI-24	rear
	R-BUS
	blue

R-BUS cable

Be careful not to connect the R-BUS connector to a printer port or SCSI port.

2.Connect your audio devices and/or headphones.

Image 7

Contents Page Contents Index Important Notes Introduction Main Features of Studio Package ProStudio Package Pro Installing the RPC-1 Setting Up Studio Package ProConnect your audio devices and/or headphones Connecting Your EquipmentComputer SI-24 Audio equipment Driver InstallationWindows Connect Midi and other devices as necessaryWindows Me Setting Up Studio Package Pro Windows Windows XP Home/Professional Setting Up Studio Package Pro Open the RPC-1 control panel Windows98/Me/2000 Making RPC-1 SettingsWindows XP Click Done to close the RPC-1 control panel To Install Sonar Installing SonarThere are many different way to start SONAR. Here are a few Sonar SettingSetting Up the Midi In and Midi Out Devices Starting SonarClick the General tab, and change the following params Setting Up the RPC-1Click OK to finish setting up the RPC-1 Input Drivers Output DriversOpening the Control Surface Toolbar Setting Up the SI-24Listening to the Demo Song Quick StartMaster Fader Let’s Try Operating SonarTransport FadersCH Select Buttons Status ButtonsPAN Knobs PLUG-IN Button EQ/SEND ButtonLocate Button Edit Redo Short CUT ButtonView Button File Save Edit Undo Edit Copy Edit Paste Edit DeleteRecord Your Guitar Performance on Track 1 of the Sonar Record and Play Back a Guitar PerformancePrepare a New Project in the Sonar Connect your guitar to the SI-24’s Guitar Hi-Z jackOperate the FXPad Using FXPadApply EQ equalizer to a Track Inserting FXPadConnect and Play a Midi Sound Module/MIDI Keyboard Setting Up a Midi TrackPlay Your Keyboard to Hear the Sound Playing Back the Performance Data Recording Your Performance Midi Real-Time RecordingAdvanced Uses Using the SI-24’s DigitalMake Settings on the SI-24 and in Sonar Change the RPC-1 SettingsPlay Back the Fader/Pan Movements Automix in SonarRecording Audio from Digital in to the Sonar Record Fader/Pan MovementsSelect a source bus or buses Make Settings for Exporting the AudioWriting a Mix to an Audio File Specify the Region that will be Written as an Audio FileSet a Sonar Bus as the External Effect Send Send the Signal from Each Track to the External EffectApplying an External Effect Connect the External Effects Processor to the SI-24Inserting a DXi Using Software SynthesizersClick OK to finish inserting a DXi To Open the Roland SI-24 Property Using the Roland SI-24 PropertyTo Set Your Options in the Roland SI-24 Property Digital IndexInformation