Roland Studio Package Pro Using the Roland SI-24 Property, To Open the Roland SI-24 Property

Page 34

Advanced Uses

Using the Roland SI-24 Property Page

You can set several options in the Roland SI-24 property page. Once you set your options, you can save them by typing a name for them in the Presets window, and clicking the Disk icon. You can create and save as many different presets as you want.

■To Open the Roland SI-24 Property Page

1.Select the “Roland SI-24” from “Tools” menu. or

1.Make sure the “Control Surfaces” toolbar is visible. To display the toolbar, use the “View - Toolbars” command to open the “Toolbars” dialog, and check the “Control Surfaces” option.

2.Make sure the name of the “Roland SI-24” is displayed in the toolbar’s dropdown menu of connected control surfaces.

3.Click the Properties button that is at the right end of the toolbar.

■To Set Your Options in the Roland SI-24 Property Page

The Roland SI-24 Property Page has following options:

Short Cut commands: You can assign each of the 10 short cut buttons to a different SONAR menu command.

Master Fader: If you use more than one virtual main bus in SONAR, you can choose which one the SI-24’s master fader controls.

Jog Wheel Resolution: You can choose by what increment you want the Now time to move when you move the Jog Wheel.

34

Image 34

Contents Page Contents Index Important Notes Introduction Main Features of Studio Package ProStudio Package Pro Setting Up Studio Package Pro Installing the RPC-1Connecting Your Equipment Connect your audio devices and/or headphonesConnect Midi and other devices as necessary Driver InstallationWindows Computer SI-24 Audio equipmentWindows Me Setting Up Studio Package Pro Windows Windows XP Home/Professional Setting Up Studio Package Pro Open the RPC-1 control panel Windows98/Me/2000 Making RPC-1 SettingsWindows XP Click Done to close the RPC-1 control panel Installing Sonar To Install SonarStarting Sonar Sonar SettingSetting Up the Midi In and Midi Out Devices There are many different way to start SONAR. Here are a fewInput Drivers Output Drivers Setting Up the RPC-1Click OK to finish setting up the RPC-1 Click the General tab, and change the following paramsSetting Up the SI-24 Opening the Control Surface ToolbarQuick Start Listening to the Demo SongFaders Let’s Try Operating SonarTransport Master FaderCH Select Buttons Status ButtonsPAN Knobs PLUG-IN Button EQ/SEND ButtonLocate Button File Save Edit Undo Edit Copy Edit Paste Edit Delete Short CUT ButtonView Button Edit RedoConnect your guitar to the SI-24’s Guitar Hi-Z jack Record and Play Back a Guitar PerformancePrepare a New Project in the Sonar Record Your Guitar Performance on Track 1 of the SonarInserting FXPad Using FXPadApply EQ equalizer to a Track Operate the FXPadConnect and Play a Midi Sound Module/MIDI Keyboard Setting Up a Midi TrackPlay Your Keyboard to Hear the Sound Recording Your Performance Midi Real-Time Recording Playing Back the Performance DataChange the RPC-1 Settings Using the SI-24’s DigitalMake Settings on the SI-24 and in Sonar Advanced UsesRecord Fader/Pan Movements Automix in SonarRecording Audio from Digital in to the Sonar Play Back the Fader/Pan MovementsSpecify the Region that will be Written as an Audio File Make Settings for Exporting the AudioWriting a Mix to an Audio File Select a source bus or busesConnect the External Effects Processor to the SI-24 Send the Signal from Each Track to the External EffectApplying an External Effect Set a Sonar Bus as the External Effect SendInserting a DXi Using Software SynthesizersClick OK to finish inserting a DXi To Open the Roland SI-24 Property Using the Roland SI-24 PropertyTo Set Your Options in the Roland SI-24 Property Index DigitalInformation