Roland Studio Package Pro Automix in Sonar, Recording Audio from Digital in to the Sonar

Page 30

Advanced Uses

■Recording Audio from DIGITAL IN to the SONAR

6.Track’s In field, choose the “Roland RPC-1 - Stereo Roland RPC-1 Multichannel 7/8” (Windows XP / 2000) or the “Roland RPC-1 - Stereo PCM In 7/8 Roland RPC-1” (Windows Me / 98SE).

7.Set the SI-24’s STATUS MODE to [REC/PLAY], and press the [STATUS] button of the track that you want to record.

8.Press the SI-24’s [REC] button to begin recording.

Automix in SONAR

Volume and pan parameters can be recorded in SONAR.

■Record Fader/Pan Movements

1.Set the SI-24’s STATUS MODE to [AUTOMIX] (lit red).

2.For the track on which you want to record fader and pan movements, press [STATUS] (lit red).

3.Press the SI-24’s [REC] to record fader and pan movements.

If there is recording armed track, audio data or MIDI events will be recorded instead of fader and pan movements. Make sure that there is no recording armed track, before Automation recording.

4.When you operate the faders/pan, those movements will be recorded.

5.Press the SI-24’s [STOP] button to stop recording.

■Play Back the Fader/Pan Movements

6.Use the SI-24’s jog dial and [FF]/[REW] buttons to move to the location where you recorded the automix.

7.Press the SI-24’s [PLAY] button to play back the song. The fader positions will move according to the automix data.

You can view and edit the recorded automation data in Track pane.

30

Image 30

Contents Page Contents Index Important Notes Main Features of Studio Package Pro IntroductionStudio Package Pro Setting Up Studio Package Pro Installing the RPC-1Connecting Your Equipment Connect your audio devices and/or headphonesConnect Midi and other devices as necessary Driver InstallationWindows Computer SI-24 Audio equipmentWindows Me Setting Up Studio Package Pro Windows Windows XP Home/Professional Setting Up Studio Package Pro Making RPC-1 Settings Open the RPC-1 control panel Windows98/Me/2000Windows XP Click Done to close the RPC-1 control panel Installing Sonar To Install SonarStarting Sonar Sonar SettingSetting Up the Midi In and Midi Out Devices There are many different way to start SONAR. Here are a fewInput Drivers Output Drivers Setting Up the RPC-1Click OK to finish setting up the RPC-1 Click the General tab, and change the following paramsSetting Up the SI-24 Opening the Control Surface ToolbarQuick Start Listening to the Demo SongFaders Let’s Try Operating SonarTransport Master FaderStatus Buttons CH Select ButtonsPAN Knobs EQ/SEND Button PLUG-IN ButtonLocate Button File Save Edit Undo Edit Copy Edit Paste Edit Delete Short CUT ButtonView Button Edit RedoConnect your guitar to the SI-24’s Guitar Hi-Z jack Record and Play Back a Guitar PerformancePrepare a New Project in the Sonar Record Your Guitar Performance on Track 1 of the SonarInserting FXPad Using FXPadApply EQ equalizer to a Track Operate the FXPadSetting Up a Midi Track Connect and Play a Midi Sound Module/MIDI KeyboardPlay Your Keyboard to Hear the Sound Recording Your Performance Midi Real-Time Recording Playing Back the Performance DataChange the RPC-1 Settings Using the SI-24’s DigitalMake Settings on the SI-24 and in Sonar Advanced UsesRecord Fader/Pan Movements Automix in SonarRecording Audio from Digital in to the Sonar Play Back the Fader/Pan MovementsSpecify the Region that will be Written as an Audio File Make Settings for Exporting the AudioWriting a Mix to an Audio File Select a source bus or busesConnect the External Effects Processor to the SI-24 Send the Signal from Each Track to the External EffectApplying an External Effect Set a Sonar Bus as the External Effect SendUsing Software Synthesizers Inserting a DXiClick OK to finish inserting a DXi Using the Roland SI-24 Property To Open the Roland SI-24 PropertyTo Set Your Options in the Roland SI-24 Property Index DigitalInformation