Roland Studio Package Pro owner manual Click Done to close the RPC-1 control panel

Page 15

Setting Up Studio Package Pro

5.Make settings as shown in the illustration.

Set all of the “R-Bus In 1/2”--“R-Bus In 7/8” faders to 0 dB (top).

Set pan to left or right.

Un-check both “Mute” settings.

6.Click the “Patchbay/Router” tab.

7.As shown in the illustration, set the “R-Bus Out 1/2” source to “Monitor Mixer.”

8.Click the “Hardware Settings” tab.

9.Check “Disable ... Monitor Mixer and Patchbay/Router”

*The wording may differ according to the OS you are using.

10.Click [Save] to assign suitable name to the settings, and then click [OK] to save them.

If for some reason the settings are changed, you can load the settings that you saved here. Click [Load] in the RPC-1 control panel to load the settings.

11.Click [Done] to close the RPC-1 control panel.

Image 15

Contents Page Contents Index Important Notes Main Features of Studio Package Pro IntroductionStudio Package Pro Installing the RPC-1 Setting Up Studio Package ProConnect your audio devices and/or headphones Connecting Your EquipmentComputer SI-24 Audio equipment Driver InstallationWindows Connect Midi and other devices as necessaryWindows Me Setting Up Studio Package Pro Windows Windows XP Home/Professional Setting Up Studio Package Pro Making RPC-1 Settings Open the RPC-1 control panel Windows98/Me/2000Windows XP Click Done to close the RPC-1 control panel To Install Sonar Installing SonarThere are many different way to start SONAR. Here are a few Sonar SettingSetting Up the Midi In and Midi Out Devices Starting SonarClick the General tab, and change the following params Setting Up the RPC-1Click OK to finish setting up the RPC-1 Input Drivers Output DriversOpening the Control Surface Toolbar Setting Up the SI-24Listening to the Demo Song Quick StartMaster Fader Let’s Try Operating SonarTransport FadersStatus Buttons CH Select ButtonsPAN Knobs EQ/SEND Button PLUG-IN ButtonLocate Button Edit Redo Short CUT ButtonView Button File Save Edit Undo Edit Copy Edit Paste Edit DeleteRecord Your Guitar Performance on Track 1 of the Sonar Record and Play Back a Guitar PerformancePrepare a New Project in the Sonar Connect your guitar to the SI-24’s Guitar Hi-Z jackOperate the FXPad Using FXPadApply EQ equalizer to a Track Inserting FXPadSetting Up a Midi Track Connect and Play a Midi Sound Module/MIDI KeyboardPlay Your Keyboard to Hear the Sound Playing Back the Performance Data Recording Your Performance Midi Real-Time RecordingAdvanced Uses Using the SI-24’s DigitalMake Settings on the SI-24 and in Sonar Change the RPC-1 SettingsPlay Back the Fader/Pan Movements Automix in SonarRecording Audio from Digital in to the Sonar Record Fader/Pan MovementsSelect a source bus or buses Make Settings for Exporting the AudioWriting a Mix to an Audio File Specify the Region that will be Written as an Audio FileSet a Sonar Bus as the External Effect Send Send the Signal from Each Track to the External EffectApplying an External Effect Connect the External Effects Processor to the SI-24Using Software Synthesizers Inserting a DXiClick OK to finish inserting a DXi Using the Roland SI-24 Property To Open the Roland SI-24 PropertyTo Set Your Options in the Roland SI-24 Property Digital IndexInformation