Quick Start
Connect and Play a MIDI Sound Module/MIDI Keyboard
Here’s how you can connect a sound module to the
MIDI IN/OUT channel 1 is used to transfer control data between the
■Setting Up a MIDI Track
1.In the Track pane,
2.Set the
3.Press the
4.In the In field, select the MIDI IN channel from the PC keyboard(except 1).
5.In the Ch field, select the MIDI OUT channel transmitted from the SONAR to the sound module(except 1).
6.In the Bnk field, enter the bank number.
7.In the Pch field, enter the program change number.
For the correspondence between the program change numbers and the sound or patch, refer to the owner’s manual of your sound module.
You can select a sound name / patch name instead of number by using the “Instrument Definitions.” For more information, see the SONAR User’s Guide.
■Play Your Keyboard to Hear the Sound
8.When you play your keyboard, the sound module will produce sound.
If you do not hear sound from the sound module, check the following points.
•Is your MIDI sound module and/or MIDI keyboard
•Are the
•Your MIDI keyboard may be using MIDI channel 1 to transmit MIDI data.
•Is the MIDI track set to the correct MIDI channel?
•Are the bank and patch settings of the sound module appropriate?
27