Yamaha 101 manual Overdubbing Additional Tracks

Page 14

2.Press the [INPUT SEL] key for the input channel that you are recorded from.

3.Press the [TRACK SEL] key of the track that you recorded on.

The line that connected the input channel to the track will now disappear and the [TRACK SEL] key will no longer be blinking red, indicating that it is no longer record- enabled.

Overdubbing Additional Tracks

1.Press and hold the [INPUT SEL] key for the input that you are going to record from.

The Input Setting popup window will appear.

2.While playing the instrument, turn the GAIN knob up to adjust the input level. The meter on the right side of the Input Setting screen should be between the –6 to 0dB mark when the instrument is at its maximum level.

3.In the Quick Navigate section press the [RECORD] key until the DIRECT page of the RECORD screen is displayed.

11

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Recording AW16G Recording 101 Table of Contents Recording the Stereo Track Creating an Audio CD Glossary AW16G Features IntroductionConnect the Monitoring System Setting up the AW16GWith Powered Monitors With Unpowered Monitors With Headphones Connect the instruments or microphonesXLR To TRS Cable Turn the Equipment on Recording Creating a New SongSetting the Input Level Assigning the Input Signal to a Track Recording the First Track Punch In/OutDisengaging a track from being record-enabled OverdubbingOverdubbing Additional Tracks Mixdown Setting the Basic Levels Adjusting the Panning Panning Guidelines Adjusting the EQ Using the EQ LibraryUsing the Dynamics Processors Using the Dynamic Processor LibraryUsing the Internal Effects Processors Recalling a Preset on an Effects ProcessorRecording the Stereo Track Creating an Audio CD Page Glossary
Top Page Image Contents