Yamaha 101 manual With Unpowered Monitors, With Headphones Connect the instruments or microphones

Page 6

With Unpowered Monitors

If no monitors are available, or if you prefer, headphones can be used for monitoring. The headphones would be connected to the PHONES jack of the AW16G.

With Headphones

Step 2: Connect the instruments or microphones.

The next step would be to connect the instruments or the microphones to the AW16G that you will be recording. Typically, it is best to start by recording the rhythm instruments first (drums and bass guitar) and then record the other instruments. The final thing recorded is usually the vocals. However, if you are

3

Image 6

Contents Recording AW16G Recording 101 Table of Contents Recording the Stereo Track Creating an Audio CD Glossary AW16G Features IntroductionSetting up the AW16G With Powered MonitorsConnect the Monitoring System With Unpowered Monitors With Headphones Connect the instruments or microphonesXLR To TRS Cable Turn the Equipment on Recording Creating a New SongSetting the Input Level Assigning the Input Signal to a Track Recording the First Track Punch In/OutDisengaging a track from being record-enabled OverdubbingOverdubbing Additional Tracks Mixdown Setting the Basic Levels Adjusting the Panning Panning Guidelines Adjusting the EQ Using the EQ LibraryUsing the Dynamics Processors Using the Dynamic Processor LibraryUsing the Internal Effects Processors Recalling a Preset on an Effects ProcessorRecording the Stereo Track Creating an Audio CD Page Glossary