Yamaha 101 manual Recording, Creating a New Song

Page 9

Recording

Now that everything is set up and connected properly you can begin recording. The first step in the recording process is to create a new song.

When you start the AW16G for the first time, an empty song will be loaded automatically. If you use this automatically loaded song, then there is no need to create a new song.

Creating a New Song

1.In the Work Navigate Section press the [SONG] key until the Song List page is displayed.

2.Move the cursor to the NEW button and press the [ENTER] key next to the jog wheel.

A popup window will ask you if you want to save the current song.

3.Move the cursor to either YES (if you want to save the current song) or NO (if you do not want to save the current song) and press the [ENTER] key.

Another popup window will appear, allowing you to choose any settings that will carried over from the current song.

6

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Recording AW16G Recording 101 Table of Contents Recording the Stereo Track Creating an Audio CD Glossary Introduction AW16G FeaturesSetting up the AW16G With Powered MonitorsConnect the Monitoring System With Headphones Connect the instruments or microphones With Unpowered MonitorsXLR To TRS Cable Turn the Equipment on Creating a New Song RecordingSetting the Input Level Assigning the Input Signal to a Track Punch In/Out Recording the First TrackOverdubbing Disengaging a track from being record-enabledOverdubbing Additional Tracks Mixdown Setting the Basic Levels Adjusting the Panning Panning Guidelines Using the EQ Library Adjusting the EQUsing the Dynamic Processor Library Using the Dynamics ProcessorsRecalling a Preset on an Effects Processor Using the Internal Effects ProcessorsRecording the Stereo Track Creating an Audio CD Page Glossary
Top Page Image Contents