Using the Internal Effects Processors

3.Use the [DATA/JOG] Wheel to select a desired preset.

4.Cursor to the Recall button and press the [ENTER] key.

5.To adjust the dynamic processor, turn the yellow [DYN] knob. In the default settings of the AW16G turning the [DYN] knob will adjust all parameters of the dynamic processor simultaneously. This allows for very quick and easy adjustment of the processor.

This is for basic dynamic processor adjustments. If you want more control you use the cursor keys to select the various parameters within the DYN EDIT screen and then use the DATA/JOG wheel to adjust them.

After applying EQ and dynamics processing to the tracks you may want to use the internal effects of the AW16G.

The AW16G has two internal effects processors with forty-eight different presets in each effects processor. Some examples of the presets in these effects processors would be reverb, delay, chorus, tremolo, and pitch-shift. It is possible to record the tracks with effects, but typically they are added during the mixdown process.

Since there are two of these internal effects processors it is not possible to have a different effect on each track, but you can send as many tracks as desired to either or both of the effect units.

Recalling a Preset on an Effects Processor

1.Press the [EFF 1] until the EFFECTS LIBRARY screen is displayed.

2.Use the [DATA/JOG] to select the desired effect preset.