Yamaha 101 manual

Page 26

Dynamics Processor: A signal processing device that is used to correct or control signal levels. They are able to compress, expand, compress-expand (compand), gate, or duck the signals passing through it.

EQ: A signal processing device that increases or reduces specific frequencies of an audio signal.

Gigabyte (GB): A unit of computer memory or data storage capacity equal to 1,024 megabytes. The AW16G comes with a 20 GB hard drive.

Hard Drive: A storage unit (fixed media) for digital data that has rigid disks coated with magnetic material in a housing that includes the drive mechanism. It is where the audio data is stored in the AW16G.

Hi-ZInput:-High Impedance. An input that is specifically designed to accept a signal from devices such as electric guitars or basses. Input 8 of the AW16G is a Hi-Z input.

Megabyte (MB): A unit of computer memory or data storage capacity equal to 1,048,576 bytes of memory space. 1,024 megabytes is equal to 1 gigabyte.

Metronome: A device used to mark time by means of regularly recurring ticks or flashes at adjustable intervals.

Mixdown: The process of mixing all of the individually recorded tracks down to a single stereo track.

Overdub: To record additional tracks to an existing recording.

Parametric EQ: A multi-band variable equalizer offering control of all the "parameters" of the internal filter sections. These parameters would be gain, center frequency, and bandwidth (also known as Q). Each channel of the AW16G has a 4-band parametric EQ.

Phantom Power: A voltage supplied by the mixer to a condenser microphone. This is typically 48 Volts but can vary widely. Inputs 1-2 of the AW16G supply phantom power for condenser microphones. If condenser microphones are to be used on inputs 3-8 of the AW16G an external phantom power supply can be used.

Punch-in:To engage record mode on a previously recorded track. This is usually done to fix or replace a part of the track.

Punch-out:To disengage record mode on a previously recorded track. This is done after performing a punch-in.

23

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Recording AW16G Recording 101 Table of Contents Recording the Stereo Track Creating an Audio CD Glossary AW16G Features IntroductionConnect the Monitoring System Setting up the AW16GWith Powered Monitors With Unpowered Monitors With Headphones Connect the instruments or microphonesXLR To TRS Cable Turn the Equipment on Recording Creating a New SongSetting the Input Level Assigning the Input Signal to a Track Recording the First Track Punch In/OutDisengaging a track from being record-enabled OverdubbingOverdubbing Additional Tracks Mixdown Setting the Basic Levels Adjusting the Panning Panning Guidelines Adjusting the EQ Using the EQ LibraryUsing the Dynamics Processors Using the Dynamic Processor LibraryUsing the Internal Effects Processors Recalling a Preset on an Effects ProcessorRecording the Stereo Track Creating an Audio CD Page Glossary
Top Page Image Contents