Meyer Sound Matrix3 manual CueMixer Setup, Connecting the CueMixer

Page 7

CueMixer Setup

Connecting the CueMixer

7

The CueMixer™ is a physical control surface for the Matrix3™ audio show control system. The faders and buttons provide a flexible interface for controlling audio processing and automation within the Matrix3.

Connecting the CueMixer

Power is suppled to the MS-CUEMIXER from an external +12VDC/2.5A power supply (included.)

Data is RS-422 and is connected to Port B of the LX-COS module in an MS-LX300 Matrix3 Primary Processor using the supplied cable (DB-9 male to DB9 male). Only one CueMixer can be connected to a Matrix3 Primary Processor. The default port is B, but you can change that to port A using an CueStation software.

The data rate for the CueMixer is 38.4K baud.

The data connector on the CueMixer is a DB-9 female.

7

Image 7

Contents Matrix3 Audio Show Control System CueMixerPage Page Page Table of Contents Page Connecting the CueMixer CueMixer SetupRS-422 Serial Cable CueMixer RS-422 Connection DIP Switch SettingsPinPurpose Page System Master CueMixer ControlsCueMixer Shift Examples Shift ModeModes SelectSkip Back Transport ButtonsChannel Pages Return to StartMute IsolateUser Buttons Programming CueMixer Functions CueMixer SetupEnable EQ/Trim Modes Enable Console ModesAssign User A/B Cues Enable Misc Console ModesButton Debounce Enable Cue 0 CueMixerSet Mode Button OverlaySet Port on LX-300 User a ModeUser a Mode Select User a Mode Print Button AssignmentsPage Mixing with Virtual Groups Using the CueMixerExecuting Cues with User a Buttons Page Basic Operation CueMixer DetailsChanging First Row of LEDs ReferenceFirst Row of Buttons Second Row of Buttons Second Row of LEDsEQ Fader Functions When EQ is ActiveFader Fader Function Mute Function Fourth Row of Buttons Third Row of LEDsThird Row of Buttons Fourth Row of LEDsPage Problem Solution Service and TroubleshootingService TroubleshootingFader Creep Verification and Minor AdjustmentBoard T1 Fader Resetting Trim Adjustments Fader Board Trim Adjustment Locations