www.ti.com
SRIO Registers
5.96Port n Attributes Error Capture CSR 0 (SPn_ERR_ATTR_CAPT_DBG0)
Each of the four ports is supported by a register of this type.
Figure 152. Port n Attributes Error Capture CSR 0 (SPn_ERR_ATTR_CAPT_DBG0)
29 | |||
INFO_TYPE | Reserv | ERROR_TYPE | IMP_SPECIFIC |
| ed |
|
|
R- |
0x00 |
|
|
LEGEND: R = Read only; |
|
|
0 | ||
IMP_SPECIFIC | Reserved | CAPT |
|
| URE_ |
|
| VALID |
|
| _INFO |
RC- | ||
|
| 0x00 |
LEGEND: R = Read only; |
|
|
Table 126. Port n Attributes Error Capture CSR 0 (SPn_ERR_ATTR_CAPT_DBG0) Field
Descriptions
Bit | Field | Value | Description |
INFO_TYPE |
| Type of information logged. | |
|
| 00 | Packet |
|
| 01 | Control symbol (only error capture register 0 is valid) |
|
| 10 | Implementation specific (capture register contents are implementation specific) |
|
| 11 | Undefined |
29 | Reserved |
| Reserved |
ERROR_TYPE |
| Encoded value of captured error bit in the Port n Error Detect Register | |
IMP_SPECIFIC |
| Implementation Dependent Error Information | |
Reserved |
| Reserved | |
0 | CAPTURE_VALI |
| This bit is set by hardware to indicate that the Packet/control symbol capture registers contain valid |
| D_INFO |
| information. For control symbols, only capture register 0 will contain meaningful information. A |
|
|
| software write of 0 clears this bit and subsequently unlocks all capture registers of port n. |
200 | Serial RapidIO (SRIO) | SPRU976 |