Peavey RQ 4300 Series manual Compressor I/O INPUT/OUTPUT, AUX 1 6 OUT Unbalanced, Power Switch

Page 13

(53)COMPRESSOR I/O (INPUT/OUTPUT)

These 1/4" stereo (TRS) jacks allow the internal compressors for each SUB group to be patched to an input channel or to an external device. The tip carries the input (return) signal to the compressor and the ring carries the output (send).

(54)SUB OUT

These 1/4" (TRS) unbalanced outputs provide signal from the SUB groups.

(55)AUX 1 - 6 OUT (UNBALANCED)

These 1/4" (TS) jacks provide signal from the AUX buses.

(56)AUX 1 - 4 OUT (BALANCED)

These XLR connectors are provided on AUX 1–4 and provide output from those buses. These can be used simultaneously with the unbalanced jacks (55), but both levels will be determined by the AUX SEND LEVEL (21).

POWER

(57)REMOVABLE POWER CORD

This receptacle is for the IEC line cord (included) that provides AC power to the unit. Connect the line cord to this connector and to a properly grounded AC supply. Damage to the equipment may occur if an improper line voltage is used (see voltage marking on unit). Never remove or cut the ground pin of the line cord plug. The console is supplied with a properly rated line cord. If lost or damaged, replace this cord with one of the proper rating.

NOTE: FOR UK ONLY

If the colors of the wires in the mains lead of this unit do not correspond with the colored markings identifying terminals in your plug, proceed as follows: (1) The wire that is colored green and yellow must be connected to the terminal marked by the letter E, or by the earth symbol, or colored green or green and yellow. (2) The wire that is colored blue must be connected to the terminal that is marked with the letter N, or colored black. (3) The wire that is colored brown must be connected to the terminal that is marked with the letter L

or colored red.

(58)POWER SWITCH

Place this switch in the “” position to apply power to the RQ 4300. Return it to the “O” position to turn the unit off. It is recommended that the unit be turned off while patching and/or applying power to external equipment to be used in conjunction with the RQ 4300. The POWER LED (48) will illuminate when power has been applied and the unit is on.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 4300 Series Page Explanation of Terms IntroductionUnpacking Connector WiringInsert Rear Panel ConnectionsLine MICMID Freq Stereo Channels Super ChannelsChannel Fader PolarityStereo RCA Line Inputs Master SectionMute SWITCH/MUTE-CLIP LED Master Section Features and Controls AUX SendsAFL SWITCH/AFL-SIGNAL LED CompressorsSUB Groups ThresholdLEFT, RIGHT, Mono Output Assign MUTE/MUTE LEDHeadphone Output Phantom PowerHeadphone Level LEFT/RIGHT Level DisplaysRear Panel Connections Removable Power Cord PowerPower Switch Compressor I/O INPUT/OUTPUTBlock Diagram Left, Center, Right Configuration Stereo Configuration RQ 4324 and 4332 Sound Reinforcement Mixer Total Harmonic Distortion THD Output SpecificationsLamp Power Signal / Overload IndicatorsPower Requirements Equivalent Input Noise EINExplicación DE LOS Términos IntoducciónCableado DE Conectadores Línea DesempaqueMicro Controles DE LOS Canales GananciaEQ Agudo Interruptor DE Mute Super CanalesInterruptor DE PFL/LED DE Señal PFL Fader DE CanalEntradas DE Línea DE 1/4 Estéreo Canales EstéreoEntradas DE Línea Estéreo RCA Nivel Sección MaestraLED DE AFL LED DE MUTE/SATURACIÓNCompresores 24 I/O DEL CompresorSUB Grupos LED DE Nivel UmbralIZQUIERDO, Derecho Y Mono Asignación DE Salida MUTE/ LED DE Mute36 1/2, 3/4, L/R, Mono Asignaciones Corte DE GravesInterruptor AFL/LED DE AFL Poder PhantomNivel DE Auriculares Salida DE AuricularesMedidores IZQUIERDO/DERECHO Muestra DE Nivel Mono AFL/PFLConexiones DEL Panel Trasero Corriente Explication DES Termes FrançaisDeballage Standarts DE ConnexionMIC Connections Panneau ArriereMID Freq Supers Canaux PFL SWITCH/SIGNAL-PFL LEDCanaux Stereo Entrees Stereo LIGNE-JACKEntrees Stereo LIGNE-RCA Section MasterMute SWITCH/MUTE-CLIP LED Gain Reduction Leds Leds de niveau de perte de gain Returns Rear Panel Connections Power Erklärung DER Begriffe EinleitungPage Auspacken Verdrahtung DER SteckerStandardkanäle Kanäle 1-20 RQ 4324 UND 1-28 RQKANAL-SCHIEBEREGLER 11 AUX PFL-Schalter/SIGNAL-PFL-LEDMUTE-SCHALTER/MUTE-CLIP-LED Stereo Channels Super ChannelsStereo 1/4 LINE-EINGÄNGE Stereo RCA LINE-EINGÄNGEFunktionen UND Regler DER MASTER-STUFE AUX Sends Phantom PowerKompressoren AFL-SCHALTER/AFL-SIGNAL-LEDLEVEL-LEDs Gain REDUCTION-LEDsMUTE/MUTE-LED 32 AFL/AFL-LEDAUX 1 und AUX Mono AFL/PFL LEVEL-ANZEIGE LEFT/RIGHT LEVEL-ANZEIGEN47 L & R Master Fader POWER-LEDAnschlüsse AN DER Rückseite 49 L, R, Mono Insert 50 L, R, Mono Unbal Unsymmetrierter AusgangAUX 1-6 OUT Unsymmetriert Compressor I/O EINGANG/AUSGANGAUX 1-4 OUT Symmetriert Stromversorgung Abziehbares StromkabelPage Peavey Electronics Corporation Limited Warranty Important Safety Instructions 2001

RQ 4300 Series specifications

The Peavey RQ 4300 Series is a versatile line of ultra-reliable mixing consoles designed to cater to a wide range of audio needs. Whether for live performances, studio recording, or installation in various venues, the RQ 4300 Series delivers exceptional audio quality and user-friendly features. One of the leading characteristics of this series is its robust construction, engineered to withstand demanding environments while ensuring longevity and stability.

At the heart of the RQ 4300 Series is a comprehensive input system that includes multiple channels with XLR and line inputs. This allows for seamless connections to microphones, instruments, and other audio sources. Each channel features a three-band EQ, giving users fine control over their audio mix. The EQ enables adjustments to boost or cut frequencies, assisting sound engineers in achieving the perfect tonal balance.

One standout feature of the RQ 4300 is its built-in effects processor. This processor offers a variety of effects ranging from reverb to delay, allowing users to enhance their sound without needing external effects units. This all-in-one approach simplifies the setup and reduces clutter in performance spaces or studios.

Additionally, the series incorporates Peavey’s high-quality preamps, known for their clarity and low noise levels. This ensures that every detail of the audio source is captured accurately, whether it's a subtle vocal nuance or the richness of an acoustic instrument. The RQ 4300’s dynamic range guarantees minimal distortion, maintaining audio fidelity throughout performances.

Another significant characteristic is the intuitive layout of controls. The console is designed for ease of use, with clear labeling and ergonomically placed faders and knobs. This user-centric design allows sound engineers to operate the console confidently, even during high-pressure situations like live shows.

Connectivity is further enhanced by the inclusion of stereo outputs, aux sends, and subgroups, which facilitate various routing options for mixed audio. This versatility supports diverse applications, making the RQ 4300 ideal for both novice users and experienced professionals.

In conclusion, the Peavey RQ 4300 Series stands out as a dependable choice for anyone in the audio industry. With its combination of rugged build quality, sophisticated features, and intuitive design, it empowers users to deliver outstanding sound in any setting. Whether for live sound reinforcement, studio tracking, or installation, the RQ 4300 is tailored to meet the demands of modern audio production.
Top Page Image Contents