Peavey BAM 210 operation manual Bass Modeling AMP, Features, Preset Structure

ENGLISH

BAM™ 210

BASS MODELING AMP

Do you think achieving a virtually unlimited collection of bass amp and cabinet tones out of a compact 2 x 10 combo is impossible? Not with the BAM 210 from Peavey Electronics. Years of research and development have produced a feature-packed bass modeling amp engineered to please today’s discriminating bassist and those who listen to the music. From its user-friendly interface to its 1/4" and XLR external outputs, the BAM is the amplifier that will take bass sound into the new millennium.

FEATURES

•500 W @ 2 Ohms, 350 W @ 4 Ohms

•2 x 10" cast-frame woofers

•1x compression horn

•Front ported

•Angled baffle board (for that tilt-back sound without sacrificing low end)

•Analog compressor

•8 digital effects

- Chorus	- Synth bass
- Flange	- Fretless bass
- Phase shift	- Funk wah
- Octave divider	- Distortion

• 8 amp models that include active and passive tone models

PRESET STRUCTURE

The BAM 210 is shipped with 16 factory presets and 16 user presets. The user presets are identical to the factory presets until modified. The factory presets illustrate the amplifier’s capabilities, and can be altered and stored as user presets. Turning the unit on while simultaneously pressing both the USER and STORE buttons on the amplifier front panel will revert both factory and user presets to their original settings. Known as reinitializing, this procedure should be performed when the unit is first unpacked and hooked up to delete any alterations to the presets that may have been made

3