Changing the Remote Control Transmission Code

CS-E15DB4EW CU-E15DBE / CS-E18DB4EW CU-E18DBE / CS-E21DB4ES CU-E21DBE

CHANGING THE REMOTE CONTROL TRANSMISSION

CODE

1.Press AUTO SW continuously for 11 seconds (buzzer sound = pep pep pep)

2.After 11 seconds, release AUTO SW, then press Remo- Con TIMER “” SW continuously for 5 seconds. Reset code will be transmitted. After the reset code is transmitted, release TIMER “” SW.

3.Press Remo-Con “OFF/ON” button. The new Remo-Con No. will be accepted and memorized, after which the new Remo-Con No. can be used.

REMO-CON NO. CHANGE IN REMOTE CONTROL

1.Remove the batteries from the battery compartment of the Remote Control.

2.On the left side of the battery compartment, there is a small opening in the centre in which Jumper (J_A) can be seen. In the accepted Remo-Con PCB shown beside, Jumper (J_B) can be seen.

J_A	J_B	Remo-Con No.
Short	Open	A (Default)

Open	Open	B

Short	Short	C
Open	Short	D

CHECK ITEMS

Is there any gas leakage at flare nut connections?

Has the heat insulation been carried out at flare nut connections?

Is the cooling operation normal?

Is the indoor unit property secured to the installation plate?

Is the power supply voltage complied with rated value?

Is the connecting cable being fixed to the terminal board firmly?

Is the connecting cable being clamped firmly?

Is the drainage OK?

Is the Earth wire connection properly done?

Is there any abnormal sound?

Is the thermostat operation normal?

Is the remote control’s LCD operation normal?

HAND OVER

•Teach the customer the operation and maintenance procedures, using the operation manual (air filter cleaning, temperature control, etc.)

As to parts to be sold separately

•With regards to installation of the parts sold separately, follow the installation manual which is provided with the parts sold separately.

CS-E15DB4EW specifications

The Philips CS-E15DB4EW is an exceptional air conditioner that exemplifies modern cooling technology while emphasizing energy efficiency and user comfort. This model is designed to provide reliable performance in various settings, making it suitable for both residential and light commercial applications.

One of the standout features of the Philips CS-E15DB4EW is its powerful cooling capacity. With a cooling power reaching up to 15000 BTUs, this air conditioner is capable of effectively cooling medium to large-sized rooms. This high capacity ensures that users enjoy a refreshingly cool environment, even during the hottest summer months.

Energy efficiency is a prominent characteristic of the CS-E15DB4EW. It features an advanced inverter technology that optimizes power consumption while maintaining the desired temperature. This technology not only results in lower electricity bills but also reduces environmental impact by minimizing energy waste. The air conditioner boasts a high EER (Energy Efficiency Ratio), making it a responsible choice for energy-conscious consumers.

In terms of convenience, the CS-E15DB4EW is equipped with a user-friendly remote control, allowing users to adjust settings from a distance. This includes temperature adjustments, fan speed settings, and timer functions, providing flexibility and comfort at the users' fingertips. Additionally, the air conditioner features various operating modes, including cool, dry, and fan modes, catering to diverse climatic conditions and individual preferences.

Another remarkable characteristic of the Philips CS-E15DB4EW is its quiet operation. With a noise level as low as 30 dB, this unit ensures that users can enjoy a peaceful environment without the disruptive sounds typical of standard air conditioning units. This feature is particularly beneficial for bedrooms or study areas where concentration or relaxation is crucial.

Moreover, the unit is designed with a sleek, modern aesthetic that seamlessly integrates into any interior decor. The easy-to-clean filters and compact design contribute to its practicality, allowing for efficient maintenance and longevity.

In conclusion, the Philips CS-E15DB4EW stands out as a versatile, efficient, and user-friendly air conditioning solution. With its powerful cooling capacity, energy-saving technologies, convenient features, and quiet operation, it effectively addresses the cooling needs of various environments. Whether for residential use or light commercial applications, this model is designed to provide a comfortable atmosphere while being mindful of energy consumption and environmental impact.