INSTALLATION INSTRUCTIONS
TOOLS AND SUPPLIES
The following tools are needed | The following materials are | |||
for installation. | required: | |||
1. | Level | 1. | Correct size copper tubing | |
2. | Hole Saw | 2. | Correct size drain pipe | |
3. | Core bits | 3. | Sleeve and bush | |
4. | Hammer | |||
4. | Vinyl tape | |||
5. | Drill | |||
6. | Torque wrench | 5. | Saddle & Clamps to support | |
7. | Adjustable wrench |
| refrigerant piping | |
8. | Flat head screwdriver | 6. | Power supply cable | |
9. | Philips head screwdriver | |||
7. | Insulation material | |||
10. | Wire stripper | |||
11. | Measuring tape | 8. | Putty or similar sealant | |
12.Ratchet set
13.Flaring tools
14.Tube cutter
SAFETY CONSIDERATIONS
Installation and servicing of air conditioner can be hazardous due to high refrigerant pressure and electrical components inside the unit. Only fully trained, qualified and certified service personnel should install, repair and service the air conditioner.
While working on the air conditioner, all precautions in the literature, tags and labels attached to the unit and all other general safety precautions should be carefully observed. Please follow all safety codes, wear safety glasses and work gloves. Also use quenching cloth for brazing operations.
It is highly recommended that this manual be read completely before installing and operating the system.
WARNING: The main power breakers to the unit , including its accessory or parts, should be turned off before performing service or maintenance operations on the unit. Dangerous high voltage can cause electric shock, serious personal injury or even death.