INSTALLATION OF FAN COIL:
The extended liquid and suction pipes and drain hose are hidden inside a slot at the back of the fan coil. This allows the hole on the wall to be either on the right or left side of the fan coil.
RIGHT SIDE HOLE POSITION: The piping and drain hose are routed straight through the hole.
LEFT SIDE HOLE POSITION: The piping and drain hose run from the right side to the left side of the unit, hidden in the slot at the back of the unit before routing through the hole on the left side of the unit.
MOUNTING FAN COIL UNIT: Hook the fan coil onto the upper portion of the installation plate ensuring that it sits securely on the installation plate.
Press the lower portion of the unit against the installation plate until the hooks at the back of the unit are securely engaged with the installation plate.
MOUNTING CONDENSING UNIT: |
|
Do not place the condensing unit |
|
directly on the ground. It should |
|
preferably be placed on a slightly |
|
raised platform to prevent rain water |
|
from splashing into it. Also ensure |
|
that it is level. Avoid installing the unit |
|
in places where flammable gases |
|
may be present. | beams or blocks |
| If necessary, due to the placement conditions, |
| rubber cushions can be placed underneath the |
| outdoor unit. |