Grizzly H6086, H6082, H6083 instruction manual Installing the Tuners, To install the tuners

Page 13

Installing the Tuners

Each tuner consists of the tuner, washer, and a barrel nut. The tuners are attached to the head- stock with a small wood screw that attaches between the tuners.

Components Needed

Qty

Guitar

1

Tuner

6

Washer

6

Barrel Nut

6

Tap Screw M2 X 12

6

Tools Needed

 

Peghead Reamer or Round File

1

Phillips Head Screwdriver

1

Drill Press with a 116" Drill Bit

1

To install the tuners:

 

1.Place the six tuners into the holes on the back of the headstock. The holes may need to be widened with a peghead reamer or a round file. DO NOT widen the holes too much—the tuners should fit snug.

2.Slide a washer over the tuner shaft and screw the barrel nut onto the tuner.

3.Align the tuners perpendicular to the edge of the headstock and parallel to each other. Use a strip of masking tape to secure their position on the headstock.

4.Using a 116" drill bit in a drill press, drill 38" deep holes into the headstock. Note—Drilling the holes deeper than 38" could result in drill- ing out through the front face of the head- stock. Use a depth stop or tape wrapped around the drill bit at the correct depth as an indicator.

5.Secure the machine heads to the guitar headstock with the tap screws.

Figure 14. Completed peghead.

Model H6082, H6083, and H6086 Heirloom Electric Guitar Kits

-11-

Image 13
Contents Models H6082, H6083, H6086 Heirloom Guitar KitsPage Table of Contents Safety Foreword IntroductionContact Info Model H6082/3 Parts Parts InventoryH6086 peghead components Model H6086 PartsIdentification Supplies/ToolsRecommended Tools & Supplies Shaping Headstock on Model H6082/83 AssemblyComponents Needed Qty Tools NeededSanding the Neck Sanding the BodyFinishing the Neck To finish the guitar body Finishing the BodyTo install the tuners Installing the TunersTo attach the neck to the guitar body Installing the NeckTo attach the pick guard to the guitar body Installing PickupsTo wire the pickups Wiring the PickupsTo attach the strap buttons to the guitar Strap ButtonsTo attach the bridge to the guitar body Installing Bridge on Model H6082/83To attach the tremolo bridge to the guitar body Installing Bridge on Model H6086Mounting Back Plates To install the nutGluing the Nut on the Model H6082 and H6083 To mount the back plate to the guitar bodyTruss Rod Cover Attaching the Nut on Model H6086Winding Strings on Model H6082/83 To install the guitar stringsCorrect string locations Winding Strings on Model H6086Neck Adjustment SET UPTo adjust the bow of the guitar neck GeneralTo adjust the string height String Height Adjustment for Model H6082/83To step Bridge height adjustment String Height Adjustment for Model H6086To adjust the pickups Pickup AdjustmentsTuning Spring Adjustment On the Model H6086To adjust the tremolo springs To tune the guitarTo set the intonation Setting IntonationReference Info AccessoriesH1302 H1300 H1298 H4979 H4977 G7984 H2347 H0736H3097-Chromatic Tuner Half-mask respirator and disposable Cartridge filtersWarranty & Returns Model # Order # Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCPage Call Today For a Free Full Color Catalog
Related manuals
Manual 36 pages 25.66 Kb