Grizzly H6083, H6082 String Height Adjustment for Model H6086, Bridge height adjustment

Page 26

String Height

Adjustment for the

Model H6086

2.De-tension the strings and adjust the bridge height by turning the height adjustment screws pointed out in Figure 40.

Correct string height is crucial for maximizing the playability of your electric guitar. The string height is the distance between the top face of the fret and the bottom face of the string (Figure 37).

String

String Height

Fret

 

 

Figure 40. Bridge height adjustment.

 

3. Re-tune the guitar and check the string

Fingerboard

height.

 

—If the strings are at the correct height, go to

 

the next section.

 

—If the strings are at the wrong height return

 

to step 2.

Figure 37. String height measurement.

 

Components Needed

Qty

Guitar with Strings Installed

1

Tools Needed

 

Metal Straightedge or Feeler Gauges

1

Hex Wrench 3MM

1

To adjust the string height:

1.Tune the guitar, then measure the string height at the twelfth fret. The 1st string mea- surement should be 364" the 6th string mea- surement should be 564".

-24-

Model H6082, H6083, and H6086 Heirloom Electric Guitar Kits

Image 26
Contents Heirloom Guitar Kits Models H6082, H6083, H6086Page Table of Contents Safety Contact Info IntroductionForeword Parts Inventory Model H6082/3 PartsModel H6086 Parts H6086 peghead componentsRecommended Tools & Supplies Supplies/ToolsIdentification Components Needed Qty AssemblyShaping Headstock on Model H6082/83 Tools NeededSanding the Body Sanding the NeckFinishing the Neck Finishing the Body To finish the guitar bodyInstalling the Tuners To install the tunersInstalling the Neck To attach the neck to the guitar bodyInstalling Pickups To attach the pick guard to the guitar bodyWiring the Pickups To wire the pickupsStrap Buttons To attach the strap buttons to the guitarInstalling Bridge on Model H6082/83 To attach the bridge to the guitar bodyInstalling Bridge on Model H6086 To attach the tremolo bridge to the guitar bodyGluing the Nut on the Model H6082 and H6083 To install the nutMounting Back Plates To mount the back plate to the guitar bodyAttaching the Nut on Model H6086 Truss Rod CoverTo install the guitar strings Winding Strings on Model H6082/83Winding Strings on Model H6086 Correct string locationsTo adjust the bow of the guitar neck SET UPNeck Adjustment GeneralTo step String Height Adjustment for Model H6082/83To adjust the string height String Height Adjustment for Model H6086 Bridge height adjustmentPickup Adjustments To adjust the pickupsTo adjust the tremolo springs Spring Adjustment On the Model H6086Tuning To tune the guitarSetting Intonation To set the intonationH1302 AccessoriesReference Info H1300 H1298 H4979 H4977 G7984 H2347 H0736Half-mask respirator and disposable Cartridge filters H3097-Chromatic TunerWarranty & Returns Warranty Card Model # Order #Grizzly INDUSTRIAL, INC BOX BELLINGHAM, WAPage Call Today For a Free Full Color Catalog
Related manuals
Manual 36 pages 25.66 Kb