Canon FS 3.6 manual Adjusting Brightness and Coloring Easy Mode, Brightness Tab

Step 3 • Adjusting Images

Adjusting Brightness and Coloring (Easy Mode)

In easy mode, the brightness and coloring of 24-Bit Color images can be adjusted with the adjust dialog.

Brightness Tab

Coloring Tab

Click [Image] and select [Adjust] or click the [Adjust] button.

Click a tab to change the image to the corre- sponding brightness and coloring settings.

• The brightness and coloring of an image may vary significantly if the display and printer color profiles differ. To ensure conformity, test repeatedly to ensure that the brightness and coloring settings are set to the best values for the final output device (i.e. the printer).

Brightness Tab

Click on the samples until the adjusted image reaches the desired brightness in the brightness tab. The brightness of the adjusted image changes each time you click a sample. The amount by which the preview sample changes with each click is controlled with the slider bar.

Original Image

Click on the sample closest to the desired brightness.

Adjusted Image

Slider Bar Controlling the Change in

Brightness

Slide it right to increase the increments.

Slide it left to decrease the increments.

Reflect Changes in Preview Image Placing a check in this box reflects the changes in the preview image in the preview window in real-time.

Cancels any adjustments and closes the adjustment dialog.

Accepts the adjustments and applies them to the preview image in the preview window.

55