Canon FS 3.6 manual change with each scan, that is whited out or too dark, Image is blurred

Appendices

Although it is the same negative film, the colors of the preview image

change with each scan.

Cause:	The exposure function is set to auto color adjustment
Solution:	In the exposure adjustment dialog, click the check box to
	remove the check mark beside the auto color adjustment
	option and drag the slider to the middle. (p. 70)

A scan with the image type set to black and white results in an image

that is whited out or too dark

Cause:	Threshold setting is too high or low
Solution:	Adjust the threshold setting. (p. 69)

Black border around film included in scanned image

Cause:	Scan area not set
Solution:	Set the scan area. (p. 41)

Cannot freely specify the scan area in the preview window

Cause:	Fixed aspect ratio selected
Solution:	Reset aspect ratio to normal setting. (p. 45)

Scanning is taking a long time

Cause:	Scan resolution is set too high
Solution:	Lower the scan resolution to the minimum setting and
	rescan.(p. 32)

Image Quality Problems

Scan quality is poor

Cause:	Scan resolution is too low
Solution:	Raise the scan resolution and rescan.(p. 32)

Image is blurred

Cause 1:	Focus setting was incorrect in manual focus mode
Solution:	Refocus in manual focus mode or use the autofocus mode.
	(p. 72)
Cause 2:	Film was shot out of focus

116