Canon FS 3.6 Installing CanoCraft FS, Turn the scanner and computer power on in that order, Other

Step 1 • Basic Procedures

Installing CanoCraft FS

Installing CanoCraft FS

After you have finished attaching the CanoScan FS2710 or 2700F film scanner to your computer, install the CanoCraft FS program with the following procedures.

Turn the scanner and computer power on in that order.

Place the software CD-ROM that accompanied the scanner into the computer drive.

Click the [Install/Uninstall Software] option in the CD-ROM menu and select [Canon CanoCraft FS] and [CanoCraft FS] in succession.

Follow the on-screen instructions to complete the remaining steps.

Minimum computer system requirements for installing CanoCraft FS:

CPU:	Windows® 95	486 or higher
	Windows® 98	MMX Pentium or higher
	Windows® NT	Pentium or Higher
Hard Disk:	50 MB or more
Main Memory (RAM):	Windows® 95	16 MB or more
		(32 MB or more recommended)
	Windows® 98	32 MB or more
	Windows® NT	(64 MB or more recommended)
		24 MB or more
		(40 MB or more recommended)
Display:	256 colors or more	(65,000 or more recommended)
Other:	CD-ROM drive

• If you are using an old version of CanoCraft FS, version 3.1 or 3.5, ensure that you delete (uninstall) it before you install version 3.6. (p. 118)

•Confirm that the scanner is correctly attached to the computer and always turn on the scanner and computer in that order before starting Windows.

•At least 50 megabytes of free space are required on the disk to which the program is being installed (5 megabytes for the application program and 45 megabytes for image files).

•CanoCraft FS 3.6 is for exclusive use with CanoScan FS2710/2700F film scanners. This program is not compatible with other Canon flatbed or sheet-fed scanners.

15