Canon FS 3.6 manual CanoCraft FS Preference Settings, Save Preview Image, Single Scan, Auto Eject

Click an option to place a check mark in its box and activate the setting.

Preferences DIalog

Other Functions

CanoCraft FS Preference Settings

The preference settings control CanoCraft FS’s automated routines for scanning and closing.

Click the [Settings] menu and select [Preferences].

Save Preview Image

Placing a check in this option causes CanoCraft FS to save the last image in the preview window at shut down. At the next startup, the image automatically appears in the preview window. This option is set to off when CanoCraft FS is first installed.

Single Scan

Placing a check in this option closes CanoCraft FS after it scans one image when started as a TWAIN driver from within a TWAIN-compliant application. This option is set to off when CanoCraft FS is first installed.

Auto Eject

Placing a check in this option causes the scanner to automatically eject the film at the end of the scan. This option is set to on when CanoCraft FS is first installed.

• Auto eject only ejects the film after the final scan, not after a preview scan.

Set the Exposure and Autofocus Settings for Final Scan

The exposure and autofocus settings are usually set automatically to the appropriate settings during the preview scan. If the preview scan is skipped, however, these settings are not set and the results may not be appropriate. Set this option to On to have the settings automatically set during the final scan when you wish to skip the preview step.

74