Canon FS 3.6 Can’t start CanoCraft FS from within another application, Problems with Scanning

Appendices

Can’t start CanoCraft FS from within another application

Cause:	Scanner settings not correctly set in the application program
Solution:	Correct the scanner settings in the application program. See
	the manual for the application program for instructions.

[CanoCraft FS or CanoCraft FS Copy is running. Close it and run this program] message displays

Cause1: You attempted to start CanoCraft FS when CanoCraft FS Copy was already running

Solution1: Close CanoCraft FS Copy before starting CanoCraft FS.

Cause2: You attempted to start CanoCraft FS Copy when CanoCraft FS was already running

Solution2: Close CanoCraft FS before starting CanoCraft FS Copy.

Problems with Scanning

[Initializing film scanner. Please remove film] message displays

Cause 1: Scanner power turned on with a film already inserted

Solution: Remove the film and follow the instructions on the screen.

Cause 2: Set period of time passed without scanner being operated after power turned on

Solution: Remove film and follow the instructions on the screen.

Image is vertically or horizontally inverted

Cause: Film is inserted upside down or backwards

Solution 1: Insert the film with the correct orientation. (Getting Started Guide)

Solution 2: Click the Rotate/Flip button and change the orientation of the image. (p. 39)

Brightness of preview image and scanned image are different

Cause:	Display brightness settings are incorrect
Solution:	Adjust display brightness settings. (Display manual)

114