Canon FS 3.6 manual Scanner not detected message displays, Problems Starting Software Programs

Appendices

Scanner not detected message displays

Cause 1: Scanner power is off

Solution: Close Windows. Turn on the scanner power first, then restart Windows and run auto configuration.

Cause 2: Scanner power was off when Windows was started.

Solution: Close Windows. Turn on the scanner power first, then restart Windows and run auto configuration.

Cause 3: Scanner is incorrectly attached

Solution: Turn off the computer and reattach the scanner properly. Turn on the scanner power first, then restart Windows and run auto configuration. (p. 120)

(Getting Started Guide)

Problems Starting Software Programs

Specified device not found message displays

Cause 1: Scanner power is off

Solution: Close Windows. Turn on the scanner power first, then restart Windows and run auto configuration.

Cause 2: Scanner power was off when Windows was started.

Solution: Close Windows. Turn on the scanner power first, then restart Windows and run auto configuration.

Cause 3: Scanner is incorrectly attached

Solution: Turn off the computer and reattach the scanner properly. Turn on the scanner power first, then restart Windows and run auto configuration. (p. 120)

(Getting Started Guide)

Problem with SCSI adapter or its software message displays

Cause:	Scanner power is off
Solution:	Turn on the scanner. (Getting Started Guide)

113