Canon FS 3.6 manual Previewing

Step 2 • Scanning

Previewing

Once you have inserted the film, selected a film and image type and adjusted the resolution settings, preview the image and specify the scan area.

Settings Display Area

Displays the selected image type, scan resolution, output resolution, output magnification, image file size, film type and ColorGear settings, as well as the free disk space on the target drive.

Preview Window

Progress Bar

The scan’s progress is indicated by the length of the bar and a percentage figure to the right. To stop the preview scan, click the [Cancel] button.

Once the preview scan commences, the preview image will begin to display in the preview window.

• Changes in categories, such as image type and brightness, are reflected immediately in the preview window. However, the preview image is only an approximation of how the final image will appear.

• A message similar to [Initializing film scanner. Please remove film.] will display if the film scanner's power is turned on with a film already inserted or if a set period of time passes without the scanner being operated after the power is turned on. If this happens, remove the film from the scanner and follow the instructions on the screen.

37