Canon FS 3.6 manual Scanner Self-Test, Self-Test Dialog

Other Functions

Scanner Self-Test

The scanner can perform a self-test to confirm the correct operation of its mechanisms, circuits and lamp. Initiate the self-test after the scanner has been completely set up using the following procedures. The self-test can also be used to check a suspected malfunction during use.

• Ensure that you eject any film from the scanner before you initiate the self- test.

•If a message displays during the procedure, follow the instructions in the message.

Self-Test Dialog

Click the [Device] menu and click [Diagnos- tics...].

Self-Test Dialog

Eject the film from the scanner and click the [Test] button.

A message will display in the dialog if a problem is detected.

Initiates the self-test.

Ends the self-test and closes the dialog.

Ejects the film.

82