Canon FS 3.6 manual Settings Display Area Pop-Up Menu

Step 1 • Basic Procedures

Settings Display Area Pop-Up Menu

Right-clicking on the settings display area summons a pop-up menu, which can be used to change the adjustable settings.

Image Type p. 30

The scanning mode can be set to black and white, 8-bit grayscale or 24-bit colour. If CanoCraft FS is started as a TWAIN driver from a TWAIN-compliant application, it can also be set to 12-bit grayscale or 36-bit colour. (This setting can also be adjusted with the Settings button.)

Scan Resolution p. 33

The scan resolution can be set to either 340, 680, 1360, or 2720 dpi. Adjusting the magnification setting allows custom resolution settings. (This setting can also be adjusted in the display box at the top of the preview window.)

Output Resolution p. 34

The output resolution settings can be selected from a list. Selecting [Display Dialog] enables items to be edited, added or deleted. (Items can also be edited, added or deleted via the [Settings] button or by clicking the [Set- tings] menu and selecting [Output Resolution].

Magnification p. 35

The output magnification can be set to either 50%, 100%, 200%, 400% or 800%. Adjusting the output magnification value in the display box at the top of the program window also allows custom magnification values. (It can also be adjusted with the output resolution setting at the top of the preview window.)

Film Type p. 29

You can select between 35 mm color negatives/color positives/monochrome negatives or IX240 color negatives/ color positives/monochrome negatives. Set this with the [Settings] button or the [Film Type] option on the Settings pull-down menu.

Color Matching p. 75

The ColorGear color management system can be turned on or off. A check mark indicates it is on, no check mark indicates off. Click to toggle between modes. (This setting can also be set with the Preferences dialog.

22