Grizzly H6082, H6083 instruction manual Attaching the Nut on Model H6086, Truss Rod Cover

Page 21

Attaching the Nut on

the Model H6086

Components Needed

Qty

Guitar

1

Floyd Rose Locking Nut

1

Tap Screw M3 X 12

2

Tools Needed

 

Narrow Chisel or Razor Blade

1

Drill with a 332" Drill Bit

1

Depth Stop

1

Phillips Head Screwdriver

1

To install the nut:

 

1.Use a chisel or razor blade to scrape any fin- ish out of the nut slot. DO NOT remove any wood from the nut slot.

2.Center the locking nut in the nut slot.

3.Drill 38" deep holes through the two holes shown in Figure 30.

Figure 30. Installing the locking nut.

4.Thread two screws through the locking nut and into the neck.

Note—The remaining lock blocks and cap screws will be installed after the guitar is tuned.

Truss Rod Cover

Components Needed

Qty

Guitar

1

Truss Rod Cover

1

Tap Screw M2 X 12

1

Tools Needed

 

Drill with a 116" Drill Bit

1

Depth stop

1

Phillips Head Screwdriver

1

To install the nut:

 

1.Center the truss rod cover over the hole for the truss rod and press it up against the nut.

2.Use 116" drill bit to drill 38" holes through the hole in the truss rod cover and into the peghead.

3.Secure the truss rod cover to the peghead with the tap screw.

Model H6082, H6083, and H6086 Heirloom Electric Guitar Kits

-19-

Image 21
Contents Models H6082, H6083, H6086 Heirloom Guitar KitsPage Table of Contents Safety Introduction ForewordContact Info Model H6082/3 Parts Parts InventoryH6086 peghead components Model H6086 PartsSupplies/Tools IdentificationRecommended Tools & Supplies Shaping Headstock on Model H6082/83 AssemblyComponents Needed Qty Tools NeededSanding the Neck Sanding the BodyFinishing the Neck To finish the guitar body Finishing the BodyTo install the tuners Installing the TunersTo attach the neck to the guitar body Installing the NeckTo attach the pick guard to the guitar body Installing PickupsTo wire the pickups Wiring the PickupsTo attach the strap buttons to the guitar Strap ButtonsTo attach the bridge to the guitar body Installing Bridge on Model H6082/83To attach the tremolo bridge to the guitar body Installing Bridge on Model H6086Mounting Back Plates To install the nutGluing the Nut on the Model H6082 and H6083 To mount the back plate to the guitar bodyTruss Rod Cover Attaching the Nut on Model H6086Winding Strings on Model H6082/83 To install the guitar stringsCorrect string locations Winding Strings on Model H6086Neck Adjustment SET UPTo adjust the bow of the guitar neck GeneralString Height Adjustment for Model H6082/83 To adjust the string heightTo step Bridge height adjustment String Height Adjustment for Model H6086To adjust the pickups Pickup AdjustmentsTuning Spring Adjustment On the Model H6086To adjust the tremolo springs To tune the guitarTo set the intonation Setting IntonationReference Info AccessoriesH1302 H1300 H1298 H4979 H4977 G7984 H2347 H0736H3097-Chromatic Tuner Half-mask respirator and disposable Cartridge filtersWarranty & Returns Model # Order # Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCPage Call Today For a Free Full Color Catalog
Related manuals
Manual 36 pages 25.66 Kb