Grizzly H6083, H6082, H6086 Supplies/Tools, Identification, Recommended Tools & Supplies

Supplies/Tools

The majority of the wooden components in this kit are fully machined from the factory and are ready for assembly. A small amount of shaping, drilling, sanding and finishing will need to be performed to complete your guitar.

Recommended Tools & Supplies:

•	Sharp Pencil
• 18" Metal Straightedge with a 1⁄32" Resolution
•	Drill Press
• Drill Bits: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 5⁄16"
•	Depth Stop
•	Bandsaw or Coping Saw with 1⁄4" Blade
•	ANSI Approved Respirator
•	ANSI Approved Safety Glasses
• Aluminum-Oxide Sanding Paper #150, #220,
	and #320 Grit
•	Wet and Dry Sanding Paper #400, #600, and
	#1000 Grit
•	Flexible Sanding Block
•	Wood Glue
•	Chisel or Razor Blade
•	Phillips Screwdriver
•	1⁄4" Steel Rod, or a Coat Hanger
•	Masking Tape
•	Tack Cloth or Clean Soft Rag
•	Sanding Sealer
•	Assorted Wood Files
•	Finishing Materials
•	Buffing Compounds
•	Oil Wood Finish
•	Soldering Iron and Solder
•	Peghead Reamer or a Round File

	Identification
		Strap
		Button
	Bridge	Pickups
Tone
Controls
3-Way		Volume Controls
Switch		Tremolo Bar

Figure 9. Model H6086 identification.

Tailstop	Bridge	Strap
		Button
		Pickups
Tone
Controls
		Volume Controls
3-Way
Switch

Figure 10. Model H6082/3 identification.

•	Ratchet with 11MM and 14MM Sockets
• Hammer
•	Small Wooden Block
•	C-Clamps
•	Wire Cutters

Fretboard Nut

Peghead

Truss Rod Cover

Fret Tuners

Figure 11. Peghead identification.

-6- Model H6082, H6083, and H6086 Heirloom Electric Guitar Kits