Setting a Seamless Loop, Tonearm Section

3.SETTING A SEAMLESS LOOP:

a. During the playback of a CD, find the point at which you want to set the beginning of the SEAMLESS LOOP (LOOP IN A). If you want to set a SEAMLESS LOOP on the fly, proceed to step B. Otherwise, while in CD Mode only, you may pause the playback by pressing the PLAY/PAUSE BUTTON (16), and adjust the LOOP IN A position by using the SCRATCH CONTROL VINYL PLATE (3), then proceed to step B.

b. At the point of which you wish to set the LOOP IN A position, press the LOOP IN A (28) button. This may be done while in either Play Mode or Pause Mode.

c. At the point of which you wish to set the LOOP OUT B position, press the LOOP OUT B/EDIT (29) button. This may be done while in either Play Mode or Pause Mode.

d. Once both the LOOP IN A and LOOP OUT B position have been set, the loop will begin to play indefinitely, without any interruption. To restart the loop from the beginning, or to stutter the loop, press the RELOOP (30) but- ton.

e. To edit the LOOP OUT B point, press the LOOP OUT B/EDIT (29) button. The loop will disengage, and you will be free to replace the LOOP OUT B position, simply by pressing the LOOP OUT B/EDIT (29) button again when you have reached the at which you wish to set the LOOP OUT B position.

f. To edit the LOOP IN A point, simply press the LOOP IN A (28) button dur- ing loop playback at the time you wish to set the new LOOP IN A point. Note that you will only be able to move the LOOP IN A point to a time already within the loop that was originally set.

g. To exit the SEAMLESS LOOP and resume normal playback, press the LOOP OUT B/EDIT (29) button. If necessary, you can set a brand new SEAMLESS LOOP (return to step A), or restart the previously playing loop by pressing the RELOOP (30) button.

SPECIFICATIONS

TURNTABLE SECTION:

Type	Direct Drive Manual Turntable
Drive Method	Super High Torque (3.6 kgf/cm) Direct Drive
Motor	DC Motor
Speed	33 1/3, 45, 78 RPM
Variable Pitch	+/- 4, 8, 16, 50% Slider with Range Selection Buttons
Wow and Flutter	Less than 0.25% WRMS*

*This rating refers to the turntable and platter assembly only and excludes the effects of records, cartridges, or tonearms.


TONEARM SECTION:
Type		Statically Balanced Straight Tonearm
Headshell Weight		5.6 g
COMPACT DISC SECTION:
Quantization		1 Bit Linear/Channel, 3 Beam Laser
Oversampling Rate		8 Times
Sampling Frequency		44.1 kHz
Frequency Response		20 Hz to 20 kHz
Total Harmonic Distortion		Less Than 0.05%
Signal to Noise Ratio		86 dB
Dynamic Range		90 dB
Digital Output		IEC958 (S/PDIF)
Channel Separation		86 dB (1 KHz)
Output Level		2.0 +/- 0.2V R.M.S.
Power Supply		AC 115/230V, 60/50 Hz
Time Display		Track Elapsed, Song Remain, or Total Remain
Instant Start		Within 0.03 Seconds
Variable Pitch	+/- 4, 8, 16, 50% Slider with Range Selection Buttons

WEIGHTS AND DIMENSIONS:

Dimensions: 17.75 x 14.65 x 6.3” (450 x 372 x 160.5 mm)

Unit Weight: 20.2 lbs (9.1 kg)

Specifications and design are subject to change without notice for purpose of improvement.

*The stated warranty does not affect statutory local warranties

OPTIONAL ACCESSORIES:

DJX-05

DJX-05 Professional Monitoring Headphones

GX-450	GX-450 Powered ABS Loudspeakers

CS-02 Professional 5-Channel Stereo Mixer

CS-02

For more information on new and exciting Gemini products, visit our website at http://www.geminidj.com!

NOTES:

____________________________________________________

<8>

3.SETTING A SEAMLESS LOOP:

SPECIFICATIONS

TURNTABLE SECTION:

Less than 0.25% WRMS*

TONEARM SECTION:

IEC958 (S/PDIF)

WEIGHTS AND DIMENSIONS:

OPTIONAL ACCESSORIES:

GX-450

CS-02