15 | Turbine Installation |
|
|
|
|
The Battery Box
The Battery Box is a NEMA 3R type and must be mounted on the wall near the SMARTBOX™ Controller. The Battery Box requires its own On/Off switch and a 100 amp fuse. Please refer to the SMARTBOX™ Controller Manual for connecting the Battery Box to the SMARTBOX™ Controller and also for maintenance and service.
IMPORTANT: Please read the SMARTBOX™ Controller Manual
TIP: Always consult and use a certified and trained electrician for connections and service.
Figure 2.6 Battery Box Enclosure
Recommended Battery Type
We only recommend using
HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev 10