IV
DO NOT CONNECT THE HONEYWELL WIND TURBINE TO ANY CONTROLLER OTHER THAN THE SMARTBOX™ Controller OR OTHER CONTROLLER
5.Choose a very calm, nearly no wind, day for the installation.
6.Follow the installation procedures contained within this Owner’s Manual and all safety codes. Follow the National Electric Code (NEC) and your local building zoning and zoning codes. In Canada, follow the Canadian Electrical Code (CEC).
7.Only licensed and trained personnel should move and lift the HONEYWELL™ Wind Turbine. The HONEYWELL™ Wind Turbine should only be moved using standard hoists and hydraulic lifts.
8.Appropriate protective personal equipment such as hard hat, work gloves, safety glasses, and closed toe work shoes should be worn when installing the HONEYWELL™ Wind Turbine.
9.Only licensed and trained personnel can perform the following maintenance functions on this HONEYWELL™ Wind Turbine:
•Open and work on the SMARTBOX™ Control Equipment.
•Open and work on the Junction Box at the turbine
•Apply any torque to any of the turbine’s fasteners
10.The installation directions include recommendations of a variety of options. Installation must be approved and certified by your local Professional Engineer (PE) and the installer must acquire all the necessary permits from the local authorities prior to installation.
11.Your installer must use only proper grounding methods as stipulated by the NEC or CEC if in Canada.
12.The HONEYWELL™ Wind Turbine is an electric generator. Therefore high voltage is generated within the system. Be sure to only use installers and maintenance professionals to perform work on this turbine.
13.Failure to complete and mail in the registration card will affect the Warranty.
14.Failure to use a licensed and trained installer or follow local codes will adversely affect the warranty coverage and possibly void your warranty.
NOTE TO INSTALLER: This Owner’s Manual should be left with the owner of the HONEYWELL™ Wind Turbine.
HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev 10