ClearOne comm AP800 operation manual Appendix C Compliance, FCC Part 15 compliance

Page 39

Appendices ~ Appendix C: Compliance

35

warranty service performed on any product shall extend the applicable warranty period.

In case of unsatisfactory operation, the purchaser shall promptly notify the Manufacturer at the address set forth below in writing, giving full particulars as to the defects or unsatisfactory operation. Upon receipt of such notice, the Manufacturer will give instructions respecting the shipment of the equipment, or such other matters as it elects to honor this warranty as above provided. This warranty does not cover damage to the equipment during shipping and the Manufacturer assumes no responsibility for such damage. All shipping costs shall be paid by the customer.

This warranty extends only to the original purchaser and is not assignable or transferable.

ClearOne Communications, Inc.

1825 Research Way

Salt Lake City, Utah 84119

Appendix C: Compliance

FCC Part 15 compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.

Changes or modifications not expressly approved by ClearOne Communications, Inc. could void the user’s authority to operate the equipment.

This equipment complies with the requirements of the European guidelines:

89/336/EEC “Electromagnetic Compatibility”

73/23/EEC “Electrical operating material for use within specific voltage limits”

Conformity of the equipment with the above guidelines is attested by the CE mark.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Image 39
Contents AP800 Audio Conferencing System AP800 Installation ClearOne Part No July 2002 Rev Table of Contents Appendices AP-Ware SoftwareProduct Overview IntroductionFeatures ClearOne Communications EuMEA GmbH Professional Services GroupSales and Customer Service Technical SupportUnpacking Controls and ConnectionsFront panel Introduction ~ Controls and Connections Rear panelLink Network Link busLink network will allow interconnection of up to eight Auxiliary equipment Power requirementsEquipment placement Equipment RequirementsHardware Setup Connecting the unitTo connect the AP800 Installation ~ Installation Networking UnitsLink connections Device IDs To create a G-Link networkTo set the device ID Installation ~ Installation Device types Mixer ModeTo set mixer mode ErrorsEC reference Menu Trees Installation ~ LCD ProgrammingSwitching from one main menu category to another LCD ProgrammingInstallation ~ LCD Programming Adjusting a valueSet Passcode Select PresetSystem parameters Lock PanelGate Parameters PA Adaptive ModeDevice ID Unit IDGate Ratio Last Mic ModeMaximum Number of Mics First Mic PriorityDecay Rate Hold TimeBaud Rate RS-232Manual Ambient To determine ambient levelTimeout Modem ModeClear Password Serial Overrun ErrorsInputs 1-8, Input Global Input ParametersAdaptive Ambient High Pass FilterThree-Band EQ Chairman MicAEC Reference Echo CancellerNLP Adjust Inputs A, B, C, DSubbus 1 Output ParametersRouting Parameters Outputs 1-8, A-DEcho Cancellation Setup Routing GuidelinesInternal Subbus EC Reference bus Master UnitSlave Unit Default Meter Meter ParametersInputs, Outputs, ERL, and Erle Technical Services Group ~ 1-800-283-5936 USA ~ Description AP-Ware software requirements64MB RAM To install AP-Ware Installing AP-WareTo decrease volume Remote ControlVolume Control To increase volumeMuting To mute an inputTo mute an output FCC, CSA, CE Appendix a SpecificationsThis warranty is void if Appendix B WarrantyAppendix C Compliance FCC Part 15 complianceAppendices ~ Appendix C Compliance Appendix D Connector Pinouts Pin Number Definable Status Default DescriptionControl/Status a pinout Control/Status Pinout Note Pin Number User Definable* Status Default DescriptionControl/Status B pinout +5VDCPin Number Control Appendix E AccessoriesAppendices ~ Appendix E Accessories RS-232 COM DCE Port PinoutMref Appendix F Serial CommandsCommand syntax Appendices ~ Appendix F Serial CommandsAP800 Serial Commands 40Appendices ~ Appendix F Serial Commands Error CodesCommand Function Explanation AambAGC AmblvlDfltm BaudDecay ChairoErle ERLFlow FMPFPP Example GainGate ExamplesLFP GmodeGratio HoldLMO LVLMaster Device MEQ CH Band MdmodeMEQ Device MdmodeMmax MHPMinit MlineInput MpassMtrx MrefMtrx 18 OutputmixDevice NLP CH MuteNLP Device Mute CH WDevice PAA NOMOffa Device NOM CHExample PcmdEvent Event List LFP, PRESET, MUTE, GAIN, AGC, EQ, GMODE, ChairoPevnt Device Pevnt Location EventPreset RefselTout Device VER UIDVER Device UIDAppendices Routing Matrix Setup~ Appendix G SWorksheets Inputs = GatedAppendices ~ Appendix G Worksheets Systemwide Parameters Auto Mix ParametersBus Glossary ~ A-D GlossaryGlossary ~ E-S Glossary ~ T-Z Index ~ A-Z Index

AP800 specifications

ClearOne has established itself as a leader in the audio and video communication technology space, and the ClearOne COMM AP800 is a prime example of the company's commitment to providing high-quality communication solutions. The AP800 is an advanced audio processing unit specifically designed for professional audio environments, including conference rooms, auditoriums, and other large venues that require exceptional audio clarity and performance.

One of the standout features of the ClearOne COMM AP800 is its robust digital signal processing capabilities. It is equipped with powerful, sophisticated algorithms that enhance audio quality by minimizing background noise and echo, ensuring crystal-clear communication even in challenging acoustic environments. This makes the AP800 ideal for videoconferencing, teleconferencing, and live events where audio fidelity is paramount.

The AP800 features multiple microphone inputs, allowing users to connect a variety of microphone types, including boundary microphones and handheld units. This versatility enables configuration for different setups, ensuring that audio coverage is optimal for all participants regardless of their location within the space.

Another impressive characteristic of the ClearOne COMM AP800 is its user-friendly interface. The unit comes with a graphical interface that simplifies configuration and control. Users can easily manage audio settings, adjust levels, and monitor system performance in real time. This intuitive design streamlines setup and operation, making it accessible for users at all technical skill levels.

The AP800 also supports VoIP and SIP technologies, making it an ideal solution for businesses looking to integrate their audio systems with modern communication networks. This feature enhances interoperability with various communication platforms and devices, ensuring seamless connectivity for users.

For added flexibility, the ClearOne COMM AP800 can be integrated into larger audio systems. It can work harmoniously with other ClearOne products and third-party equipment, leveraging its modular design to create a comprehensive communication environment tailored to specific needs.

In summary, the ClearOne COMM AP800 represents a significant advancement in audio processing technology, offering state-of-the-art features for high-performance audio applications. Its powerful DSP capabilities, versatile microphone support, user-friendly interface, and seamless integration capabilities make it a must-have for any organization seeking to elevate their audio communication experience. With the AP800, ClearOne continues to push the boundaries of what's possible in professional audio technology.