ClearOne comm AP800 operation manual Baud, Decay, Chairo, Dfltm

Page 46

42

Appendices ~ Appendix F: Serial Commands

BAUD

This command selects or returns the baud rate for the RS-232 port on the AP800.

[DEVICE] BAUD <X>

Explanation

<X>

X=1 Selects 9,600 baud (bps) rate

X=2 Selects 19,200 baud (bps) rate

X=3 Selects 38,400 baud (bps) rate

X=Null Parameter to return the baud (bps) rate

DECAY

This command changes or reports back the setting of the decay rate for a given AP800.

[DEVICE] DECAY <X>

Explanation

<X>

X=1 Parameter to set the decay rate to slow X=2 Parameter to set the decay rate to medium X=3 Parameter to set the decay rate to fast X=Null Parameter to return the current decay rate

Return Values

The command will return the updated condition (1=9,600 baud, 2=19,200 baud, 3=38,400 baud) of the baud rate in the same format as the command.

CHAIRO

This command changes or reports back the state of the chairman override for a microphone channel.

[DEVICE] CHAIRO <CH> <X>

Explanation

<CH>

CH= 1-8 Parameter to apply to the specified microphone channel

CH= * Parameter to apply command to all microphone channels

<X>

X=0 Parameter to set the state to OFF

X=1 Parameter to set the state to ON

X=2 Parameter to toggle the state from one

state to the other (regardless of current state) X=Null Parameter to return the current state

Return Values

The command will return the updated condition (On=1, Off=0) of the chairman override in the same format as the command.

Return Values

The command will return the updated decay rate for the selected AP800 in the same format as the command.

DFLTM

This command changes and reports back the status of the default meter.

[DEVICE] DFLTM <CH> <W>

Explanation

<CH>

CH= 1-8 Parameter to apply to the specified channel CH= A-D Parameter to apply to the specified channel CH= Null Parameter to return the current state of the

defaultmeter <W>

W= I Parameter to specify an input channel W= O Parameter to specify an output channel

Return Values

The command will return the current default meter in the same format as the command.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Page 45 Page 47
Image 46
Page 45 Page 47
Contents AP800 Audio Conferencing System AP800 Installation ClearOne Part No July 2002 Rev Table of Contents AP-Ware Software AppendicesIntroduction Product OverviewFeatures Technical Support Professional Services GroupSales and Customer Service ClearOne Communications EuMEA GmbHControls and Connections UnpackingFront panel Rear panel Introduction ~ Controls and ConnectionsLink bus Link NetworkLink network will allow interconnection of up to eight Equipment Requirements Power requirementsEquipment placement Auxiliary equipmentConnecting the unit Hardware SetupTo connect the AP800 Networking Units Installation ~ InstallationLink connections To create a G-Link network Device IDsTo set the device ID Mixer Mode Installation ~ Installation Device typesErrors To set mixer modeEC reference LCD Programming Installation ~ LCD ProgrammingSwitching from one main menu category to another Menu TreesAdjusting a value Installation ~ LCD ProgrammingLock Panel Select PresetSystem parameters Set PasscodeUnit ID PA Adaptive ModeDevice ID Gate ParametersFirst Mic Priority Last Mic ModeMaximum Number of Mics Gate RatioHold Time Decay RateTo determine ambient level RS-232Manual Ambient Baud RateSerial Overrun Errors Modem ModeClear Password TimeoutInput Parameters Inputs 1-8, Input GlobalChairman Mic High Pass FilterThree-Band EQ Adaptive AmbientInputs A, B, C, D Echo CancellerNLP Adjust AEC ReferenceOutputs 1-8, A-D Output ParametersRouting Parameters Subbus 1Routing Guidelines Echo Cancellation SetupInternal Subbus Master Unit EC Reference busSlave Unit Meter Parameters Default MeterInputs, Outputs, ERL, and Erle Technical Services Group ~ 1-800-283-5936 USA ~ AP-Ware software requirements Description64MB RAM Installing AP-Ware To install AP-WareTo increase volume Remote ControlVolume Control To decrease volumeTo mute an input MutingTo mute an output Appendix a Specifications FCC, CSA, CEAppendix B Warranty This warranty is void ifFCC Part 15 compliance Appendix C ComplianceAppendices ~ Appendix C Compliance Pin Number Definable Status Default Description Appendix D Connector PinoutsControl/Status a pinout +5VDC Pin Number User Definable* Status Default DescriptionControl/Status B pinout Control/Status Pinout NoteRS-232 COM DCE Port Pinout Appendix E AccessoriesAppendices ~ Appendix E Accessories Pin Number ControlAppendices ~ Appendix F Serial Commands Appendix F Serial CommandsCommand syntax Mref40Appendices ~ Appendix F Serial Commands Error Codes AP800 Serial CommandsCommand Function Amblvl AambAGC ExplanationChairo BaudDecay DfltmERL ErleFMP FlowFPP Examples GainGate ExampleHold GmodeGratio LFPLVL LMOMaster Device Mdmode MdmodeMEQ Device MEQ CH BandMline MHPMinit MmaxMref MpassMtrx InputOutputmix Mtrx 18Device Mute CH W MuteNLP Device NLP CHDevice NOM CH NOMOffa Device PAAPcmd ExampleDevice Pevnt Location Event Event List LFP, PRESET, MUTE, GAIN, AGC, EQ, GMODE, ChairoPevnt EventRefsel PresetTout Device UID UIDVER Device VERInputs = Gated Routing Matrix Setup~ Appendix G SWorksheets AppendicesSystemwide Parameters Auto Mix Parameters Appendices ~ Appendix G WorksheetsBus Glossary Glossary ~ A-DGlossary ~ E-S Glossary ~ T-Z Index Index ~ A-Z

AP800 specifications

ClearOne has established itself as a leader in the audio and video communication technology space, and the ClearOne COMM AP800 is a prime example of the company's commitment to providing high-quality communication solutions. The AP800 is an advanced audio processing unit specifically designed for professional audio environments, including conference rooms, auditoriums, and other large venues that require exceptional audio clarity and performance.

One of the standout features of the ClearOne COMM AP800 is its robust digital signal processing capabilities. It is equipped with powerful, sophisticated algorithms that enhance audio quality by minimizing background noise and echo, ensuring crystal-clear communication even in challenging acoustic environments. This makes the AP800 ideal for videoconferencing, teleconferencing, and live events where audio fidelity is paramount.

The AP800 features multiple microphone inputs, allowing users to connect a variety of microphone types, including boundary microphones and handheld units. This versatility enables configuration for different setups, ensuring that audio coverage is optimal for all participants regardless of their location within the space.

Another impressive characteristic of the ClearOne COMM AP800 is its user-friendly interface. The unit comes with a graphical interface that simplifies configuration and control. Users can easily manage audio settings, adjust levels, and monitor system performance in real time. This intuitive design streamlines setup and operation, making it accessible for users at all technical skill levels.

The AP800 also supports VoIP and SIP technologies, making it an ideal solution for businesses looking to integrate their audio systems with modern communication networks. This feature enhances interoperability with various communication platforms and devices, ensuring seamless connectivity for users.

For added flexibility, the ClearOne COMM AP800 can be integrated into larger audio systems. It can work harmoniously with other ClearOne products and third-party equipment, leveraging its modular design to create a comprehensive communication environment tailored to specific needs.

In summary, the ClearOne COMM AP800 represents a significant advancement in audio processing technology, offering state-of-the-art features for high-performance audio applications. Its powerful DSP capabilities, versatile microphone support, user-friendly interface, and seamless integration capabilities make it a must-have for any organization seeking to elevate their audio communication experience. With the AP800, ClearOne continues to push the boundaries of what's possible in professional audio technology.
Top Page Image Contents