Basic operation
■Changing the program name when you save
You can modify the program name when you save. If you wish to do so, use the following procedure before step 1 of the Writing procedure.
1.Press the [EDIT] key to enter Normal Edit mode or EX Edit mode.
2.Press the PROGRAM [8] key.
The display will show Rename in the left side of the screen.
The program name will be displayed in square brackets [ ].
3.Use the [√ ][®] keys to select the character that you wish to change.
4.Use the
You can assign a name of up to twelve characters.
2.Press the PROGRAM [7] key, and then press the [®] key once.
The left side of the display will indicate Copy.
The copy source program number will be displayed at the right of this, and at the far right the copy destina- tion program number will be displayed in square brackets [ ].
3.If you wish to change the copy destination, use the
You can play the keyboard to audition the sound of the copy destination program.
4.If you wish to change the copy destination, press the [®] key once, and then use the
You can play the keyboard to audition the sound of the copy source program.
5.Press the [WRITE/ENTER] key.
A message will ask you to confirm the Copy opera- tion.
6.To copy the data, press the [WRITE/ENTER] key. To cancel without copying, press the [EXIT] key.
When the data has been copied, the display will indicate Completed.
Writing global settings
If you have modified Global mode parameters and want to save these settings in the internal memory of the
If you turn off the power before writing these settings, they will revert to their previous values.
1.Press the [WRITE/ENTER] key.
The mode does not matter.
The left side of the display will indicate WRITE. The writing destination program number will be dis- played in square brackets [ ] at the right, but in this case you do not need to specify this.
2.Press the [GLOBAL] key.
A message will ask you to confirm the Write opera- tion.
3.To write the data, press the [WRITE/ENTER] key. To cancel without writing, press the [EXIT] key.
When the data has been written, the display will indicate Completed.
Copying a program
This function is convenient when you wish to create several variations of a program by slightly modifying the parameter settings.
1. Press the [GLOBAL] key to enter Global mode.
Returning a program to the factory settings
You can use the following procedure to return a program to the factory settings, for example if you overwrite a program accidentally.
When you perform this procedure, all parameters that make up that program will be reset to the factory settings.
1.Press the [GLOBAL] key to enter Global mode.
2.Press the PROGRAM [7] key, and then press the [®] key five times.
The display will indicate Init Prog.
3.Use the
You can play the keyboard to audition the sound of the selected program.
4.Press the [WRITE/ENTER] key.
A message will ask you to confirm that you want to return this program to the factory settings.
5.To return the program to the factory settings, press the [WRITE/ENTER] key. To cancel, press the [EXIT] key.
When the operation is finished, the display will indicate Completed.
16