Korg CX-3 Dump Program Dump One Program, Dump Program All Dump All Programs, Drawbar Scan

Page 30

Parameters

Dump Program (Dump One Program)

This command dumps the data for the single program you specify. For details refer to “MIDI data dump” (p.28).

Dump Program All (Dump All Programs)

This command dumps the data for all programs. For details refer to “MIDI data dump” (p.28).

Dump Global (Dump Global Parameter)

This command dumps global data. For details refer to “MIDI data dump” (p.28).

Dump All Prog + Global (Dump All Program and Global Parameter)

This command dumps all program data and global data. For details refer to “MIDI data dump” (p.28).

Drawbar Scan

When the CX-3 receives MIDI control changes, the drawbar registers will be modified, which will mean that the sound will no longer match the Drawbar 1 or 2 settings of the front panel.

When you execute this command, the levels of Drawbar 1 and 2 will be scanned, and their values will be loaded into the drawbar register.

Execute this command when you want the sound to reflect the Drawbar 1 or 2 settings.

Default DB Select (Drfault Drawbar Select)

This registers the current setting of the DRAWBAR SELECT section as the default for when the power is turned on.

Exp Pd 1 Calibration (Expression Pedal 1 Calibration)

If the expression pedal connected to the rear panel EXPRESSION PEDAL jack does not produce the correct amount of control when it is operated, use the following procedure to adjust the sensitivity of the expression pedal.

1 . ConnectanexpressionpedaltotheEXPRESSION

PEDALjack.

2 . Slcommandshitect .

3 . Pressthe[WRITE/ENTER]key.

The display will indicate Set Minimum.

4 . Movmhsetnixpreson,pedalumnitpositi andpressthe[WRITE/ENTER]key.

The display will indicate Set Max.

5 . Movhemaximumtsxpretosipedalnton,positi andpressthe[WRITE/ENTER]key.

Wheel Brake

This simulates the rotation of the wheel that occurs when the power of a combo organ is turned on/off. When you press the [WRITE/ENTER] key, the wheel rotation will gradually slow down and stop. Press the [WRITE/ENTER] key once again, and the wheel will gradually resume rotating.

Group 8

DEMO Play

[1...9]

Here you can select and play the demo songs.

For details refer to “5. Listening to the demo songs”

(p.13).

 

Type 1 Ex Drawbar 1

[G4...C7]

Specify the sound that will be assigned to the left- most bar (16') of the EX Drawbars (Drawbar 2) used in an EX program.

This setting will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 1.

Type 1 Ex Drawbar 2

[G4...C7]

Specify the sound that will be assigned to the second bar from the left (5-1/3') of the EX Drawbars (Draw- bar 2) used in an EX program.

This setting will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 1.

Type 1 Ex Drawbar 3

[G4...C7]

Specify the sound that will be assigned to the third bar from the left (8') of the EX Drawbars (Drawbar 2) used in an EX program.

This setting will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 1.

Type 1 Ex Drawbar 4

[G4...C7]

Specify the sound that will be assigned to the right- most bar (4') of the EX Drawbars (Drawbar 2) used in an EX program.

This setting will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 1.

Type 2 Ex Drawbar 1

[G4...C7]

Type 2 Ex Drawbar 2

[G4...C7]

Type 2 Ex Drawbar 3

[G4...C7]

Type 2 Ex Drawbar 4

[G4...C7]

Specify the sounds that will be assigned to the EX Drawbars (Drawbar 2) used in an EX program.

These settings will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 2.

Type 3 Ex Drawbar 1

[G4...C7]

Type 3 Ex Drawbar 2

[G4...C7]

Type 3 Ex Drawbar 3

[G4...C7]

Type 3 Ex Drawbar 4

[G4...C7]

Specify the sounds that will be assigned to the EX

Drawbars (Drawbar 2) used in an EX program.

These settings will be used if the EX Edit mode Group

2 “EX Drawbar Type” parameter is set to 3.

 

Type 4 Ex Drawbar 1

[G4...C7]

Type 4 Ex Drawbar 2

[G4...C7]

Type 4 Ex Drawbar 3

[G4...C7]

Type 4 Ex Drawbar 4

[G4...C7]

Specify the sounds that will be assigned to the EX Drawbars (Drawbar 2) used in an EX program.

These settings will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 4.

Since notes above F#8 on the CX-3 are “wrapped around” so that they will sound an octave lower, we recommend that you play keys in the bottom octave of the CX-3 when checking these notes.

26

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Page FCC Regulation Warning for U.S.A CE mark for European Harmonized StandardsParameters SymbolKeys and knobs Display screen MIDI-related conventionsContents EX mode Main featuresNormal mode About the CXControls and their functions Front panelGlobal key Rotary section Midi in connector Rear panelPower cable connections ConnectionsDrawbar levels and icons Switching the displayDisplay screen ShortcutPlaying the CX-3 Play using the drawbarsAbout programs How a program is organizedPress the EX Mode key to enter EX mode Try selecting other programsSelect a program in Normal mode Select a program in EX modePlay the keyboard Applying effects to your performance When performing with the drawbarsWhen playing a program Dividing the keyboard into left and rightKey settings of the Percussion section Vibrato and chorusRotary speaker Other effects Key settings of the Rotary section ReverbListening to the demo songs OverdriveEditing a program Editing the drawbar parametersCopying drawbar parameters Writing a program Parameters unique to a combo organOther editing Press the or + key to select VintageWriting global settings Returning a program to the factory settingsCopying a program Output Level 127 Wheel Type Vintage, CleanGroup Over Tone LevelEX Drawbar Type EX Mode Drawbar LevelDB Preset’s Perc Drawbar Preset Percussion Dis, Ena Perc Nrml Level Percussion Normal LevelTone Treble 10...+10 Amp Type Type 1, Type 2, Pre AmpAmp Gain Tone Middle 10...+10Rotor Stop Transit Rotor Stop Transition Rotor Up Transit Rotor Up TransitionRotor Down Transit Rotor Down Transition Rotor Strt Transit Rotor Start TransitionRev Mix Ctrl Max Reverb Mix Control Range Amp Gain Ctrl Min AMP Gain Control RangeAmp Gain Ctrl Max AMP Gain Control Range RenameTranspose 12...+12 Global modeMaster Tune 430.0Hz...+450.0Hz Exp Minimum Level Expression Minimum LevelMidi Upper 2nd Ch Midi Transmit Channel Upper 2nd 16, Off Midi Global Ch Midi Global ChannelMidi Upper Rx Ch Midi Receive Channel Upper Midi Lower 2nd Ch Midi Transmit Channel Lower 2ndCC# DB2-1 Midi Control Change Assign for Drawbar CC# Lower DB Sel Midi Control Change Assign forLower Drawbar Select 31, 33...95, Off CC# DB2-3 Midi Control Change Assign for DrawbarCopy Copy One Program CC# Rotary Fast Midi Control Change Assign forProgram Mapper Swap Swap ProgramDump Program All Dump All Programs Default DB Select Drfault Drawbar SelectDump Program Dump One Program Dump Global Dump Global ParameterMidi applications Connecting an external Midi sequencer or computerHow the drawbars work About MidiMidi data dump TransmissionIf you wish to execute the dump, press the WRITE/ENTER key ReceptionReceiving a data dump Changing the program / bankTo silence all notes To reset all controllersTransmitting sound settings and other data Data Dump Universal system exclusiveVoice name list Normal mode programsEX mode programs Demo song namesTroubleshooting Selectable pedal angle Specifications and optionsFortissimo function Cable storageMidi implementation chart Function Transmitted Recognized RemarksIndex Korg INC
Related manuals
Manual 5 pages 26.43 Kb Manual 4 pages 38.2 Kb
Top Page Image Contents