Korg CX-3 Rotor Up Transit Rotor Up Transition, Rotor Down Transit Rotor Down Transition

Page 24

Parameters

Rotor Up Transit (Rotor Up Transition)

[0...99]

Adjust the time over which the rotor rotation changes

from slow to fast.

 

Rotor Down Transit (Rotor Down Transition)

[0...99]

Adjust the time over which the rotor rotation changes from fast to fast.

Speed

 

Slow

Fast

 

 

 

 

 

Fast Speed

 

Slow Speed

 

 

 

Time

 

Up Transit

Down Transit

Rotor Stop Transit (Rotor Stop Transition)

[0...99]

Adjust the time over which the rotor rotation actually

comes to a stop after you stop the rotation.

 

Rotor Strt Transit (Rotor Start Transition)

[0...99]

Adjust the time over which the rotor reaches the specified speed after it begins to rotate.

When Rotary is on

 

Speed

 

Stop

Start

 

 

 

 

 

Slow or Fast Speed

 

 

Time

 

Start Transit

Stop Transit

Horn Mic Distance

[0...99]

Adjust the distance between the horn and the mic.

Horn Mic Spread

[0...99]

Adjust the feeling of spaciousness for the sound of the horn.

Rotor Mic Distance

[0...99]

Adjust the distance between the rotor and the mic.

Rotor Mic Spread

[0...99]

Adjust the feeling of spaciousness for the sound of the rotor.

Mic Spread

Mic Distance

Horn

Mic Distance

Rotor

Group 7

Split Point (Keyboard Split Point)

[C2...C7]

This parameter is displayed in Normal Edit mode. Specify the split point at which the keyboard will be split. This setting will be the highest key of the left- hand keyboard range.

Split Upper Octave (Upper Octave Shift)

[–2, –1, 0]

This parameter is displayed in Normal Edit mode. When the keyboard is split, this parameter lowers the pitch of the right-hand keyboard range in one-octave steps.

Split Lower Octave (Lower Octave Shift)

[0, +1, +2]

This parameter is displayed in Normal Edit mode. When the keyboard is split, this parameter uppers the pitch of the left-hand keyboard range in one-octave steps.

Hold Uppr Ctrl (Controller for Hold Upper)

[Off, Pedal 1/(Pdl1)*, Pedal 2/(Pdl 2)*] This parameter is displayed in Normal Edit mode.

Pedal 1: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to turn Hold on/off for the notes played on the keyboard for the Upper tone generator.

Pedal 2: A pedal switch etc. connected to the ASSIGN- ABLE PEDAL/SW 2 jack can be used to perform the above operation.

Off: No function.

Hold Lowr Ctrl (Controller for Hold Lower)

[Off, Pedal 1/(Pdl1)*, Pedal 2/(Pdl 2)*]

This parameter is displayed in Normal Edit mode.

Pedal 1: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to turn Hold on/off for the notes played on the keyboard for the Lower tone generator.

Pedal 2: A pedal switch etc. connected to the ASSIGN- ABLE PEDAL/SW 2 jack can be used to perform the above operation.

Off: No function.

Hold Ctrl (Controller for Hold)

[Off, Pedal 1/(Pdl 1)*, Pedal 2/(Pdl 2)*] This parameter is displayed in EX Edit mode.

Pedal 1: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to turn Hold on/off for the notes you play.

Pedal 2: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack can be used to perform the above function.

Off: No function.

Split Sw Ctrl (Controller for Split Switch)

[Off, Pedal 1/(Pdl 1)*, Pedal 2/(Pdl 2)*]

This parameter is displayed in Normal Edit mode.

Pedal 1: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to turn the [SPLIT] key on/off.

Pedal 2: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack can be used to perform the above function.

Off: No function.

*(Pdl 1), (Pdl 2): These indicate that Pedal 1 or Pedal 2 are selected for the Global mode Group 1 “Prog Up Ctrl” or “Prog Down Ctrl” parameters. With these settings, the settings of Global mode are used, and the settings you made here will be ignored. However if you select another value in Global mode, the display here will change from (Pdl 1) to Pedal 1 or from (Pdl 2) to

20 Pedal 2, and you will be able to operate the corresponding function from the pedal switch.

Image 24
Contents Page FCC Regulation Warning for U.S.A CE mark for European Harmonized StandardsSymbol Keys and knobsParameters Display screen MIDI-related conventionsContents Main features Normal modeEX mode About the CXControls and their functions Front panelGlobal key Rotary section Midi in connector Rear panelPower cable connections ConnectionsSwitching the display Display screenDrawbar levels and icons ShortcutPlay using the drawbars About programsPlaying the CX-3 How a program is organizedPress the EX Mode key to enter EX mode Try selecting other programsSelect a program in Normal mode Select a program in EX modePlay the keyboard When performing with the drawbars When playing a programApplying effects to your performance Dividing the keyboard into left and rightKey settings of the Percussion section Vibrato and chorusRotary speaker Key settings of the Rotary section Reverb Listening to the demo songsOther effects OverdriveEditing a program Editing the drawbar parametersCopying drawbar parameters Parameters unique to a combo organ Other editingWriting a program Press the or + key to select VintageWriting global settings Returning a program to the factory settingsCopying a program Wheel Type Vintage, Clean GroupOutput Level 127 Over Tone LevelEX Mode Drawbar Level DB Preset’s Perc Drawbar Preset Percussion Dis, EnaEX Drawbar Type Perc Nrml Level Percussion Normal LevelAmp Type Type 1, Type 2, Pre Amp Amp GainTone Treble 10...+10 Tone Middle 10...+10Rotor Up Transit Rotor Up Transition Rotor Down Transit Rotor Down TransitionRotor Stop Transit Rotor Stop Transition Rotor Strt Transit Rotor Start TransitionAmp Gain Ctrl Min AMP Gain Control Range Amp Gain Ctrl Max AMP Gain Control RangeRev Mix Ctrl Max Reverb Mix Control Range RenameGlobal mode Master Tune 430.0Hz...+450.0HzTranspose 12...+12 Exp Minimum Level Expression Minimum LevelMidi Global Ch Midi Global Channel Midi Upper Rx Ch Midi Receive Channel UpperMidi Upper 2nd Ch Midi Transmit Channel Upper 2nd 16, Off Midi Lower 2nd Ch Midi Transmit Channel Lower 2ndCC# Lower DB Sel Midi Control Change Assign for Lower Drawbar Select 31, 33...95, OffCC# DB2-1 Midi Control Change Assign for Drawbar CC# DB2-3 Midi Control Change Assign for DrawbarCC# Rotary Fast Midi Control Change Assign for Program MapperCopy Copy One Program Swap Swap ProgramDefault DB Select Drfault Drawbar Select Dump Program Dump One ProgramDump Program All Dump All Programs Dump Global Dump Global ParameterConnecting an external Midi sequencer or computer How the drawbars workMidi applications About MidiMidi data dump TransmissionReception Receiving a data dumpIf you wish to execute the dump, press the WRITE/ENTER key Changing the program / bankTo reset all controllers Transmitting sound settings and other data Data DumpTo silence all notes Universal system exclusiveNormal mode programs EX mode programsVoice name list Demo song namesTroubleshooting Specifications and options Fortissimo functionSelectable pedal angle Cable storageMidi implementation chart Function Transmitted Recognized RemarksIndex Korg INC
Related manuals
Manual 5 pages 26.43 Kb Manual 4 pages 38.2 Kb