Parameters
2. Global mode
In Global mode you can press PROGRAM
Group 1
Set the master tuning, and the expression pedal and pedal switch functions.
Group 2
Set the MIDI channel.
Group 3
Set the velocity value of MIDI note messages, and the pitch bend range.
Group 4
Set MIDI filters.
Group 5
Set the MIDI control change numbers used to transmit and receive drawbar settings.
Group 6
Set the MIDI control change numbers assigned to front panel keys and to connected pedals.
Group 7
Copy, swap, initialize programs, and dump data.
Group 8
Play the demo songs.
Group 1
Master Tune |
|
This adjust the overall pitch of the entire | |
Hz steps, relative to the reference pitch of A4 (middle | |
of A). |
|
Transpose |
|
Adjust the pitch in semitone steps over a range of ± 1 octave.
Exp Minimum Level (Expression Minimum Level) [0...30]
Specify the minimum level when the expression pedal etc. is operated.
This will be the volume when the controller selected by the “Exp Control” parameter is at its minimum level.
Exp Control (Expression Controller) [Both, Knob, Pedal] Both: The front panel [EXPRESSION/OVERDRIVE] knob and the expression pedal etc. connected to the rear panel EXPRESSION PEDAL jack will both control the volume. These two will function simultaneously. Knob: The [EXPRESSION/OVERDRIVE] knob will control the volume.
Pedal: The expression pedal connected to the rear panel EXPRESSION PEDAL jack will control the volume.
Prog Up Ctrl (Program Up Controller)
[Off, Pedal 1/(Pdl 1), Pedal 2/(Pdl 2)] Pedal 1: A pedal switch connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to switch programs. When you press the pedal switch, the pro- gram number will be incremented in steps of one.
Pedal 2: A pedal switch connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack can be used to perform the above function.
Off: No function.
(Pdl 1), (Pdl 2): This indicates that the same pedal switch is selected for the “Prog Down Ctrl” parameter described below. Please select a different pedal switch.
If the same pedal switch as selected for this param- eter is also selected for a Normal Edit mode or EX Edit mode parameter, this (Global mode) setting will take priority, and the Normal Edit mode or EX Edit mode setting will be ignored.
Porg Down Ctrl (Program Down Controller)
[Off, Pedal 1/(Pdl 1), Pedal 2/(Pdl 2)] Pedal 1: A pedal switch connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to switch programs. When you press the pedal switch, the pro- gram number will be decremented in steps of one. Pedal 2: A pedal switch connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack can be used to perform the above function.
Off: No function.
(Pdl 1), (Pdl 2): This indicates that the same pedal switch is selected for the “Prog Down Ctrl” parameter described above. Please select a different pedal switch.
If the same pedal switch as selected for this param- eter is also selected for a Normal Edit mode or EX Edit mode parameter, this (Global mode) setting will take priority, and the Normal Edit mode or EX Edit mode setting will be ignored.
22