Korg CX-3 CC# Lower DB Sel Midi Control Change Assign for, Lower Drawbar Select 31, 33...95, Off

Page 28

Parameters

Merge Lower Msg (Merge Lower Message) [Off, On] On: MIDI messages of the channel specified by the Global mode Group 2 “MIDI Lower Rx Ch” parameter will be converted to the channel specified by the Global mode Group 2 “MIDI Lower Tx Ch” and transmitted.

Group 5

CC# Upper DB Sel (MIDI Control Change Assign for

Upper Drawbar Select)

[1...31, 33...95, Off]

Specify the MIDI control change number that will be

used to transmit and receive the UPPER setting of the

DRAWBAR SELECT section. (The factory setting is

79.)

 

CC# Lower DB Sel (MIDI Control Change Assign for

Lower Drawbar Select)

[1...31, 33...95, Off]

Specify the MIDI control change number that will be used to transmit and receive the LOWER setting of the DRAWBAR SELECT section. (The factory setting is 80.)

CC# DB1–1 (MIDI Control Change Assign for Drawbar

1–16')[1...31, 33...95, Off]

Specify the MIDI control change number that will be used to transmit and receive the 16' setting of Draw- bar 1. (The factory setting is 16.)

CC# DB1–2 (MIDI Control Change Assign for Drawbar

1–5-1/3')[1...31, 33...95, Off]

Specify the MIDI control change number that will be used to transmit and receive the 5-1/3' setting of Drawbar 1. (The factory setting is 17.)

CC# DB1–3 (MIDI Control Change Assign for Drawbar

1–8')[1...31, 33...95, Off]

Specify the MIDI control change number that will be used to transmit and receive the 8' setting of Drawbar 1. (The factory setting is 18.)

CC# DB1–4 (MIDI Control Change Assign for Drawbar

1–4')

[1...31, 33...95, Off]

Specify the MIDI control change number that will be

used to transmit and receive the 4' setting of Drawbar

1.

(The factory setting is 19.)

CC# DB1–5 (MIDI Control Change Assign for Drawbar

1–2-2/3')[1...31, 33...95, Off]

Specify the MIDI control change number that will be used to transmit and receive the 2-2/3' setting of Drawbar 1. (The factory setting is 20.)

CC# DB1–6 (MIDI Control Change Assign for Drawbar

1–2')

[1...31, 33...95, Off]

Specify the MIDI control change number that will be

used to transmit and receive the 2' setting of Drawbar

1.

(The factory setting is 21.)

CC# DB1–7 (MIDI Control Change Assign for Drawbar

1–1-3/5'’)

[1...31, 33...95, Off]

Specify the MIDI control change number that will be used to transmit and receive the 1-3/5' setting of Drawbar 1. (The factory setting is 22.)

CC# DB1–8 (MIDI Control Change Assign for Drawbar

1–1-1/3')[1...31, 33...95, Off] Specify the MIDI control change number that will be used to transmit and receive the 1-1/3' setting of Drawbar 1. (The factory setting is 23.)

CC# DB1–9 (MIDI Control Change Assign for Drawbar

1–1')[1...31, 33...95, Off]

Specify the MIDI control change number that will be used to transmit and receive the 1' setting of Drawbar 1. (The factory setting is 24.)

CC# DB2–1 (MIDI Control Change Assign for Drawbar

2–16')[1...31, 33...95, Off] Specify the MIDI control change number that will be used to transmit and receive the 16' setting of Draw- bar 2. (The factory setting is 70.)

CC# DB2–2 (MIDI Control Change Assign for Drawbar

2–5-1/3')[1...31, 33...95, Off]

Specify the MIDI control change number that will be used to transmit and receive the 5-1/3' setting of Drawbar 2. (The factory setting is 71.)

CC# DB2–3 (MIDI Control Change Assign for Drawbar

2–8')[1...31, 33...95, Off] Specify the MIDI control change number that will be used to transmit and receive the 8' setting of Drawbar 2. (The factory setting is 72.)

CC# DB2–4 (MIDI Control Change Assign for Drawbar

2–4')[1...31, 33...95, Off]

Specify the MIDI control change number that will be used to transmit and receive the 4' setting of Drawbar 2. (The factory setting is 73.)

CC# DB2–5 (MIDI Control Change Assign for Drawbar

2–2-2/3')[1...31, 33...95, Off] Specify the MIDI control change number that will be used to transmit and receive the 2-2/3' setting of Drawbar 2. (The factory setting is 74.)

CC# DB2–6 (MIDI Control Change Assign for Drawbar

2–2')[1...31, 33...95, Off]

Specify the MIDI control change number that will be used to transmit and receive the 2' setting of Drawbar 2. (The factory setting is 75.)

CC# DB2–7 (MIDI Control Change Assign for Drawbar

2–1-3/5'’)[1...31, 33...95, Off] Specify the MIDI control change number that will be used to transmit and receive the 1-3/5' setting of Drawbar 2. (The factory setting is 76.)

CC# DB2–8 (MIDI Control Change Assign for Drawbar

2–1-1/3')[1...31, 33...95, Off]

Specify the MIDI control change number that will be used to transmit and receive the 1-1/3' setting of Drawbar 2. (The factory setting is 77.)

CC# DB2–9 (MIDI Control Change Assign for Drawbar

2–1')[1...31, 33...95, Off] Specify the MIDI control change number that will be used to transmit and receive the 1' setting of Drawbar 2. (The factory setting is 78.)

24

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Page FCC Regulation Warning for U.S.A CE mark for European Harmonized StandardsSymbol Keys and knobsParameters Display screen MIDI-related conventionsContents Main features Normal modeEX mode About the CXControls and their functions Front panelGlobal key Rotary section Midi in connector Rear panelPower cable connections ConnectionsSwitching the display Display screenDrawbar levels and icons ShortcutPlay using the drawbars About programsPlaying the CX-3 How a program is organizedPress the EX Mode key to enter EX mode Try selecting other programsSelect a program in EX mode Select a program in Normal modePlay the keyboard When performing with the drawbars When playing a programApplying effects to your performance Dividing the keyboard into left and rightVibrato and chorus Key settings of the Percussion sectionRotary speaker Key settings of the Rotary section Reverb Listening to the demo songsOther effects OverdriveEditing the drawbar parameters Editing a programCopying drawbar parameters Parameters unique to a combo organ Other editingWriting a program Press the or + key to select VintageReturning a program to the factory settings Writing global settingsCopying a program Wheel Type Vintage, Clean GroupOutput Level 127 Over Tone LevelEX Mode Drawbar Level DB Preset’s Perc Drawbar Preset Percussion Dis, EnaEX Drawbar Type Perc Nrml Level Percussion Normal LevelAmp Type Type 1, Type 2, Pre Amp Amp GainTone Treble 10...+10 Tone Middle 10...+10Rotor Up Transit Rotor Up Transition Rotor Down Transit Rotor Down TransitionRotor Stop Transit Rotor Stop Transition Rotor Strt Transit Rotor Start TransitionAmp Gain Ctrl Min AMP Gain Control Range Amp Gain Ctrl Max AMP Gain Control RangeRev Mix Ctrl Max Reverb Mix Control Range RenameGlobal mode Master Tune 430.0Hz...+450.0HzTranspose 12...+12 Exp Minimum Level Expression Minimum LevelMidi Global Ch Midi Global Channel Midi Upper Rx Ch Midi Receive Channel UpperMidi Upper 2nd Ch Midi Transmit Channel Upper 2nd 16, Off Midi Lower 2nd Ch Midi Transmit Channel Lower 2ndCC# Lower DB Sel Midi Control Change Assign for Lower Drawbar Select 31, 33...95, OffCC# DB2-1 Midi Control Change Assign for Drawbar CC# DB2-3 Midi Control Change Assign for DrawbarCC# Rotary Fast Midi Control Change Assign for Program MapperCopy Copy One Program Swap Swap ProgramDefault DB Select Drfault Drawbar Select Dump Program Dump One ProgramDump Program All Dump All Programs Dump Global Dump Global ParameterConnecting an external Midi sequencer or computer How the drawbars workMidi applications About MidiMidi data dump TransmissionReception Receiving a data dumpIf you wish to execute the dump, press the WRITE/ENTER key Changing the program / bankTo reset all controllers Transmitting sound settings and other data Data DumpTo silence all notes Universal system exclusiveNormal mode programs EX mode programsVoice name list Demo song namesTroubleshooting Specifications and options Fortissimo functionSelectable pedal angle Cable storageMidi implementation chart Function Transmitted Recognized RemarksIndex Korg INC
Related manuals
Manual 5 pages 26.43 Kb Manual 4 pages 38.2 Kb
Top Page Image Contents