Korg CX-3 Amp Gain Ctrl Min AMP Gain Control Range, Amp Gain Ctrl Max AMP Gain Control Range

Page 25

Parameters

Wheel Brk Ctrl (Controller for Wheel Brake)

[Off, Pedal 1/(Pdl 1)*, Pedal 2/(Pdl 2)*] Pedal 1: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to turn the Global mode Group 7 “Wheel Brake” param- eter on/off.

Pedal 2: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack can be used to perform the above function.

Off: No function.

Rtry Fast Ctrl (Controller for Rotary Fast)

[Off, Pedal 1/(Pdl 1)*, Pedal 2/(Pdl 2)*] Pedal 1: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to turn the ROTARY section [FAST] key on/off.

Pedal 2: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack can be used to perform the above function.

Off: No function.

Rtry Stop Ctrl (Controller for Rotary Stop)

[Off, Pedal 1/(Pdl 1)*, Pedal 2/(Pdl 2)*] Pedal 1: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to turn the ROTARY section [STOP] key on/off.

Pedal 2: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack can be used to perform the above function.

Off: No function.

Amp Gain Ctrl (Controller for AMP Gain)

[Off, Pedal 1/(Pdl 1)*, Pedal 2/(Pdl 2)*]

Pedal 1: An expression pedal etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to control the Normal Edit mode or EX Edit mode Group 4 “Amp Gain” parameter.

Pedal 2: An expression pedal etc. connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack can be used to perform the above function.

Off: No function.

Amp Gain Ctrl Min (AMP Gain Control Range

Minimum)[0...99] This sets the minimum value of the Normal Edit mode or EX Edit mode Group 4 “Amp Gain” parameter.

This will be the gain when an expression pedal etc. specified by the “Amp Gain Ctrl” parameter is set to its minimum position.

Amp Gain Ctrl Max (AMP Gain Control Range

Maximum)[0...99] This sets the maximum value of the Normal Edit mode or EX Edit mode Group 4 “Amp Gain” param- eter.

This will be the gain when an expression pedal etc. specified by the “Amp Gain Ctrl” parameter is set to its maximum position.

Rev Mix Ctrl (Controller Select for Reverb Mix)

[Off, Pedal 1/(Pdl 1)*, Pedal 2/(Pdl 2)*] Pedal 1: An expression pedal etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to control the Normal Edit mode or EX Edit mode Group 5 “Reverb Mix Level” parameter.

Pedal 2: An expression pedal etc. connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack can be used to perform the above function.

Off: No function.

Rev Mix Ctrl Min (Reverb Mix Control Range Minimum)

[0...99] This sets the minimum value of the Normal Edit mode or EX Edit mode Group 5 “Reverb Mix Level” param- eter.

This will be the reverb mix level when an expression pedal etc. specified by the “Reverb Mix Ctrl” param- eter is set to its minimum position.

Rev Mix Ctrl Max (Reverb Mix Control Range

Maximum)[0...99] This sets the maximum value of the Normal Edit mode or EX Edit mode Group 5 “Reverb Mix Level” parameter.

This will be the reverb mix level when an expression pedal etc. specified by the “Reverb Mix Ctrl” param- eter is set to its maximum position.

Group 8

Rename

Here you can modify the name. You can use up to twelve characters.

Use the [√ ][®] keys to select the character that you wish to change, and use the [–]/[+] keys to select the character.

The following characters can be used.

*(Pdl 1), (Pdl 2): These indicate that Pedal 1 or Pedal 2 are selected for the Global mode Group 1 “Prog Up Ctrl” or “Prog Down Ctrl” parameters. With these settings, the settings of Global mode are used, and the settings you made here will be ignored. However if you select another value in Global mode, the display here will change from (Pdl 1) to Pedal 1 or from (Pdl 2) to

Pedal 2, and you will be able to operate the corresponding function from the pedal switch.

21

 

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page CE mark for European Harmonized Standards FCC Regulation Warning for U.S.AKeys and knobs SymbolParameters Display screen MIDI-related conventionsContents Normal mode Main featuresEX mode About the CXFront panel Controls and their functionsGlobal key Rotary section Rear panel Midi in connectorConnections Power cable connectionsDisplay screen Switching the displayDrawbar levels and icons ShortcutAbout programs Play using the drawbarsPlaying the CX-3 How a program is organizedTry selecting other programs Press the EX Mode key to enter EX modeSelect a program in EX mode Select a program in Normal modePlay the keyboard When playing a program When performing with the drawbarsApplying effects to your performance Dividing the keyboard into left and rightVibrato and chorus Key settings of the Percussion sectionRotary speaker Listening to the demo songs Key settings of the Rotary section ReverbOther effects OverdriveEditing the drawbar parameters Editing a programCopying drawbar parameters Other editing Parameters unique to a combo organWriting a program Press the or + key to select VintageReturning a program to the factory settings Writing global settingsCopying a program Group Wheel Type Vintage, CleanOutput Level 127 Over Tone Level DB Preset’s Perc Drawbar Preset Percussion Dis, Ena EX Mode Drawbar Level EX Drawbar Type Perc Nrml Level Percussion Normal LevelAmp Gain Amp Type Type 1, Type 2, Pre AmpTone Treble 10...+10 Tone Middle 10...+10Rotor Down Transit Rotor Down Transition Rotor Up Transit Rotor Up TransitionRotor Stop Transit Rotor Stop Transition Rotor Strt Transit Rotor Start TransitionAmp Gain Ctrl Max AMP Gain Control Range Amp Gain Ctrl Min AMP Gain Control RangeRev Mix Ctrl Max Reverb Mix Control Range RenameMaster Tune 430.0Hz...+450.0Hz Global modeTranspose 12...+12 Exp Minimum Level Expression Minimum LevelMidi Upper Rx Ch Midi Receive Channel Upper Midi Global Ch Midi Global ChannelMidi Upper 2nd Ch Midi Transmit Channel Upper 2nd 16, Off Midi Lower 2nd Ch Midi Transmit Channel Lower 2ndLower Drawbar Select 31, 33...95, Off CC# Lower DB Sel Midi Control Change Assign forCC# DB2-1 Midi Control Change Assign for Drawbar CC# DB2-3 Midi Control Change Assign for DrawbarProgram Mapper CC# Rotary Fast Midi Control Change Assign forCopy Copy One Program Swap Swap ProgramDump Program Dump One Program Default DB Select Drfault Drawbar SelectDump Program All Dump All Programs Dump Global Dump Global ParameterHow the drawbars work Connecting an external Midi sequencer or computerMidi applications About MidiTransmission Midi data dumpReceiving a data dump ReceptionIf you wish to execute the dump, press the WRITE/ENTER key Changing the program / bankTransmitting sound settings and other data Data Dump To reset all controllersTo silence all notes Universal system exclusiveEX mode programs Normal mode programsVoice name list Demo song namesTroubleshooting Fortissimo function Specifications and optionsSelectable pedal angle Cable storageFunction Transmitted Recognized Remarks Midi implementation chartIndex Korg INC
Related manuals
Manual 5 pages 26.43 Kb Manual 4 pages 38.2 Kb
Top Page Image Contents